Locking Block

This is the block that holds the things without any nut-bolt or external things.

" 3D Part Details "

@3D Printing:--
Printer Name :- Creality CR 10 MAX 3D
Printer
Nozzle Size :- 0.8mm

@Wall :--
Wall Line Count :- 4

@Top/Bottom:--
Top/Bottom thickness :- 1.0mm
Top Layer :- 2
bottom Layer :- 2

@Infill :--
Infill Density :- 100%
Infill Patten :- Grid
Infill Line Multiplier :- 2

@Speed :--
Print Speed :- 50mm/s
Infill Speed :- 50mm/s
Wall Speed :- 25mm/s
Outer Wall Speed :- 25mm/s
Inner Wall Speed :- 25mm/s
Top/Bottom Speed :- 25mm/s
Travel Speed :- 150mm/s

@Support :---
Generate Support :- No Support

Video are also there :--

Creality K1 gridfinity organizer

When trying to organize my workspace I discovered gridfinity. I was completely hooked and every millimeter of my desk and drawers is now lined with grids and boxes.

Derived from [Zack Freedman's](https://thangs.com/designer/ZackFreedman) parametric #Gridfinity modular workshop storage system

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](https://bit.ly/3E2NxnZ)

V2 Logo

Creality K1C 120mm Fan HEPA & Carbon Filter Conversion

Lower Body.stl

HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

HMG7 Lightweight Fan Guard V2.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Creality Ender 3 Max power supply reallocator

Meanwell Power Supply.stl

2023 - Ender 3 Board fan silencer/guard

I was fond of the original design(https://www.thingiverse.com/thing:2935204), but it didn't address the noise issue. That's why I designed a new motherboard fan guard/silencer that significantly reduces the noise level while while bearly affecting the cooling for the motherboard. The difference in sound is clearly audible.

The STL file will be blank and will not have my logo on it

Creality Falcon Gen 1 Laser Height Adjustment Risers

CR Falcon Gen 1 Height Adjustment Risers.stl

Suporte camera nebula Ender3v3KE.3mf

Suporte camera nebula Ender3v3KE.stl

ANTI-VIBRATION FEET K1

Creality K1 Assembly - Alpha v0.01 v5_Creality K1 Ayak v3_Front left.3mf

Chunky Shark.

Chunky Shark.3mf

ATX PC CASE - 180 x 180mm print volume

0_preview_only_entire_case_not_for_printing.stl

DONT TOUCH Ender 3 Screen cover

Ender 3 screen cover.stl

Raspberry Pi Camera Mount for Ender 2

ender2_raspicam2_mount-v2.step

Creality K2 Poop Chute

Poop Chute.stl

Bubbly Manatee

Bubbly Manatee Multicolor.3mf

Chubby Iguana

Chubby Iguana.3mf

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 2)

PART_RAISER_K1 (3x).stl

Belt Idler for Original Ender 3 Y-Belt

Designed to prevent Ender 3 Y-belt from rubbing on the aluminium extrusion and raise the belt a bit to make it parallel

Creality

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Locking Block

Creality K1 gridfinity organizer

V2 Logo

Creality K1C 120mm Fan HEPA & Carbon Filter Conversion

HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

HMG7 Lightweight Fan Guard V2.stl

Creality Ender 3 Max power supply reallocator

2023 - Ender 3 Board fan silencer/guard

Creality Falcon Gen 1 Laser Height Adjustment Risers

Suporte camera nebula Ender3v3KE.3mf

ANTI-VIBRATION FEET K1

Chunky Shark.

ATX PC CASE - 180 x 180mm print volume

DONT TOUCH Ender 3 Screen cover

Raspberry Pi Camera Mount for Ender 2

Creality K2 Poop Chute

Bubbly Manatee

Chubby Iguana

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 2)

Belt Idler for Original Ender 3 Y-Belt