Dippy Baby Diplodocus

Dippy Head.3mf

Blazie

Blazie.3mf

Baby Lumi

Baby Lumi.3mf

Ender 3 S1 Plus Bed Shape

E3S1+ bed shape v0.stl

Executioner Axe K1C Door Handle

Executioner Door Handle K1C.stl

Lemonstrous.

Lemonstrous.3mf

Bee Keychain

Bee Keychain.3mf

Fangie Bat

Fangie.3mf

Wool Mouse 

Wool Mouse (legs) Multicolor.3mf

FY-11 Digital Humidity /Temp. meter magnet mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Can be used anywhere. 

It's designed as a panel meter. So mounting is a bit challenging. To solve the problem I designed this magnetic mount which uses 6x3mm neodymium magnets or can be even be screw mounted after clearing the sacrificial layer of 0.2mm.

Material - Any
Layer height - 0.2

HMG7.4 Artillery Sidewinder X2 Gantry Adapter.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Axis Reference - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, to completely remove the thinking part about this equation!

ABSTRACT HALFMOON WITH LED TEALIGHT / VORONOI / DESIGNER LED TEALIGHT / LIGHTNING / GOTHIC

HALFMOON TEALIGHT.stl

Baby Bat

Baby Bat.3mf

Little Zombie

Little Zombie.3mf

T-Rex

T-Rex.3mf

Christmas Elf

Christmas Elf.3mf

3D scan of Rancor Head

Scan of Rancor Head using Creality Lizard Scanner.  The OBJ file is a raw file from CR Studio and the STL has been edited only to have a flat base.  The print was done on a BambuLab P1P at .16 layer height in PLA.

Rancor.stl

HMG7.2 Orbiter V2.0 Front Mount V3.stl

HMG7.3 BIQU B1 Gantry Backplate.stl

Creality

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dippy Baby Diplodocus

Blazie

Baby Lumi

Ender 3 S1 Plus Bed Shape

Executioner Axe K1C Door Handle

Lemonstrous.

Bee Keychain

Fangie Bat

Wool Mouse

FY-11 Digital Humidity /Temp. meter magnet mount

HMG7.4 Artillery Sidewinder X2 Gantry Adapter.stl

Axis Reference - Ender 3 Pro

ABSTRACT HALFMOON WITH LED TEALIGHT / VORONOI / DESIGNER LED TEALIGHT / LIGHTNING / GOTHIC

Baby Bat

Little Zombie

T-Rex

Christmas Elf

3D scan of Rancor Head

HMG7.2 Orbiter V2.0 Front Mount V3.stl

HMG7.3 BIQU B1 Gantry Backplate.stl