**NEW VERSION HERE:** [Creality Box Rotated Logo](https://than.gs/m/917355)

Introducing the Creality Box, a 3D printable model that lets you show your appreciation for Creality, one of the leading brands of 3D printers and accessories. This box features the Creality logo on the top and a base with 9 compartments to store and organize your tools and gadgets. It also has a latch and handles for easy opening and carrying.

The Creality Box is compatible with all the Tool Box Base with Divider models I designed, such as the ones with 2, 3, or 6 compartments. You can swap the base to create your own customized Creality box with different sizes and layouts. It will also be compatible with the future bases that I will design.

The Creality Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to match your Creality printer.

I created this box as a tribute to Creality, after winning a Creality K1 on the #crealityvidschallenge contest. I wanted to share my gratitude to Creality with the 3D printing community.

Download the Creality Box today and celebrate your love for Creality with this awesome box!

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without original designer explicit written consent.

To sell them legally, message the original designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Creality Box

DISPLAY ONLY - Creality Box Frikarte3D.stl

Creality Box Logo R Inner Part Frikarte3D.stl

An improved add-on strain relief for the creality Ender-3 S1.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: Yes

!!! ATTENTION !!!
Please be aware that for very high models (> 250mm) the toolhead cable might be rubbing against the top beam of the printer.
For those large prints it might be better to remove the strain relief for the time being.

Creality Ender-3 S1 improved strain relief

An improved add-on strain relief for the Ender3 S1.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: Yes

Ender3_S1_ImprovedStrainRelief.stl

A tool holder for the Creality Ender-3 V2.

Print :
Resolution: 0.2 mm
Infill: 20%
Supports: Yes

Creality Ender-3 V2 tool holder

A tool holder for the Creality Ender-3 V2.

Print :
Resolution: 0.2 mm
Infill: 20%
Supports: No

**Update V2+V3!**

**You can get the new version with alot of improvements on Cults.**
[https://cults3d.com/en/3d-model/various/creality-ender-3-v2-fan-cover-duct](https://cults3d.com/en/3d-model/various/creality-ender-3-v2-fan-cover-duct)

cheers!




----------

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5331687.

----------


This is a replacement for the stock hotend fan case / housing / cover since they break alot on the front fan screws.

I've made this to print out of a single part with no supports but still keep the design of the stock one. The fans inside + the radial fan airflow piece can still be used in this cover as well. 

Take care about the 2 small pins on the side to not break them since they are used to align the radial fan airflow piece.

I recommend to print in PETG and befor the first mount to drill out the boreholes for the screws to prevent cracking of them (some possible filament left in there from printing).

If you like my design, you can send me a tip above to pay off the coffee while i made this.

THE FREE MODEL YOU CAN DOWNLOAD HERE MIGHT NOT FIT SINCE IT WAS A FIRST TEST PRINT MODEL!!! YOU SHOULD GET THE CURRENT MODEL FROM CULTS3D!!!

Ender 3V2 Hotend Fan Cover Housing Duct

Are you a fan of Creality, one of the leading brands of 3D printers and accessories? Do you want to store and organize your tools and gadgets in a cool and convenient way? Then you need the Creality Box, a 3D printable model that lets you create your own custom box with the Creality logo.

This box is a remix of the Tool Box by Yanev, but with the Creality logo on the top. It's a new version of my Creality Box but with the logo is rotated 180º to make it read correctly when transporting with the handle and from the back when it’s open. It also has a latch and handles for easy opening and carrying.

The Creality Box is compatible with all the Tool Box Base models I designed. You can swap the base to create your own customized Creality box with different sizes and layouts. It will also be compatible with the future bases that I will design.

The Creality Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to match your Creality printer.

I created this box as a tribute to Creality, after winning a Creality K1 on the #crealityvidschallenge contest. I wanted to share my gratitude to Creality with the 3D printing community.

Download the Creality Box today and celebrate your love for Creality with this awesome box!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Creality Box Rotated Logo

Creality Box Top Rotated Logo Frikarte3D.stl

DISPLAY ONLY - Creality Box Logo Rotated Frikarte3D.stl

This is a business card holder in the shape of an Ender 3 Pro 3D Printer.
It is a creative and fun way to display your cards on your desk or counter. The printer design shows your passion and skill for 3D printing and makes your workspace stand out.
It can hold up to 20 standard-sized cards. This model is perfect for anyone who works in 3D printing, design, engineering, or any other tech-related business. It can also be a great gift for your clients or colleagues who are into 3D printing.
Download this model today and enjoy the coolness of an Ender 3 Pro 3D Printer on your desk!😎
Make sure to use supports and a thin layer height to preserve all the details of this model 🙌

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Ender 3 Pro Business Card Holder

My 3d design won second place in Prusa's Printables.com competition. 

[All versions can be downloaded for free and without a printables account on this link](https://www.printables.com/fr/model/217840-axe-magnet)

A printable fridge magnet without any support. Then just stick two magnets and you can give your fridge the style of a Viking!!!

Printing does not require any support (even photos)

Good Print !


Axe Magnet 

LameSingleMagn10x2.stl


https://direct.me/dragontrapperslodge

Includes: Sculpted Base, 3 Models: Giff, Loxodon, & Rhinofolk Brewer

SIZE:Medium 25mm  
SUPPORTED: Yes
 Join us on Patreon to receive monthly miniatures sets and an ever-growing welcome pack! Vote on future models as well as join monthly painting contests: patreon.com/dragontrapperslodge

Giff, Loxodon, & Rhinofolk Brewer

FemalePirate_Rhino_v01.stl

_[Version 2 has been released](thangs.com/designer/Kyniverse/3d-model/Cable%20Spine%20V2-901792)_

**_The perfect way to manage your dangling cables!_**

In the past I have tried various options when it comes to cable management such as zip-ties, cable-sleeves and the go-to cable-chain with the small latches but none of them felt right to me.

I have included various variations so feel free to choose the right one for you!
- 0.00mmcl (no clearance socket)
- 0.25mmcl (0.25mm clearance socket)
- Wide (Wider version)
- Thin (1.2mm wide clamps)
- Thick (2.0mm wide clamps)

This part was designed and created within Plasticity

If you have any questions or remarks, leave a comment or shoot an [Email](mailto:kyniverse+printware@gmail.com) to kyniverse+printware@gmail.com

Cable Spine

CableSpine_Wide_Thick_0.00mmcl.stp

**Practical Printing - REPRAP Edition!**

This new Power Supply Cover allows for installing a 120mm Cooling fan on a Meanwell LRS350 power supply unit.  This is a revision of my cover for the base model Ender 3 power supply: 120mm Fan Mod

**CAUTION:** Modifying a Power Supply can be dangerous due to stored voltage in capacitors / transformers.  Take caution when installing!

_Designed to fit the Meanwell, model: LRS350-24 or LRS350-12 Power Supply that came on Ender 3 Pro and V2 models._

Soldering Required: To connect the fan to the JST connector of the stock PSU fan.

Fan is intended to pull air OUT of the PSU, drawing air in from the PSU vents and the cover venting.

Note: No Buck Converter required as the Meanwell PSU has a 12v fan stock. Just splice your new fan to the old fan's wiring and connector.

---------------------------------------------------------------

 **Necessary Hardware (Affiliate Links):**
  - Meanwell LRS350: https://amzn.to/35vr2KV
  - 1x 120mm Fan: https://amzn.to/2XAR7EF 
   - 4x M3x30mm screws: https://amzn.to/3JPkTIz
   - 5x M3 Heat Inserts (if using Heat Insert vers.): https://amzn.to/3t6B6SN

---------------------------------------------------------------

Spacer Plate design included is REQUIRED to make this design work. It moves the PSU away from the Z-Axis upright to clear the rollers on the X-Axis Carriage.

**PRINT PARAMETERS:**
  - Recommend minumum of 4 Perimeters and 10% Infill. 
  - PETG filament recommended, PLA has worked for me in the past though.

---------------------------------------------------------------

- **POST PROCESSING:**
  - Take care when removing part from print surface as the hex mesh can be delicate and the design has a LOT of surface area on the build plate.

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

---------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally



Meanwell LRS350 120mm Fan Cover - Quiet Mod!

Meanwell 350w 120mm Fan Cover v2.step

120mm_PSU_Spacer_v2.stl

Spatula and two Nippers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5117607.

** V2 NOW RELEASED **

___
Note: This will NOT fit an Ender at all. Only CR10S Pro V2
___


This work is a product of frustration and sweat, as fellow ...Thingiversian ?!? @Mangusman07 and I both found that after purchasing a complete direct drive extruder solution and new all metal hot end from the above mentioned supplier, they failed to provide that last detail that makes the system complete...a fan shroud solution.

Left to our own devices to scour the net for solutions, (clearly we weren't the first people with CR10S Pro V2's to have purchased this product...right?!?)
well after printing three different models that just didn't fit my setup quite right, I got fed up.

So, out came the Google search for CAD models of OEM parts and I fired up the calipers...modified some of the best parts of the closest working solutions I could fine.

Behold the now second working solution to the Creality / MicroSwiss CR10S PRO V2 Super Stock OEM original fans and BLT mounting solution for the all metal hot-end that has the following features:

 - works with stock OEM fans
 - designed for MicroSwiss all metal CR10S Pro hot end (length is key here, no knock-offs, no Ender version)
 - mounts BLTouch at the correct 3mm pin height from nozzle tip
 - dual duct work for better airflow
 - endoscope probe mount for 6mm cameras
 - correct mounting hole placement
 - one piece monolithic construction

-----------------------------
NOTE:
Offset for the BLTouch Probe Tip: X= -46.00 Y= -10.00 

THE Z-PROBE OFFSET IS DETERMINED BY THE FIRMWARE

This is the offset from the switch point of the probe to the tip of the nozzle. 
EVERY printer installation (and probe) is different. So once you tram the bed; home Z; then run a mesh level, it will be calculated by the system.

-----------------------------

Big thanks to all those who came before, without which this would have been a much more daunting task:

SATSANA Ender 3 Remix for Micro - Swiss Direct Drive + BLtouch by Juanolo on Thingiverse: https://www.thingiverse.com/thing:4408571
SATSANA Ender 3 Remix for Micro - Swiss Direct + BLtouch + Endoscope mount by Suidog on Thingiverse: https://www.thingiverse.com/thing:4769804
CR10S Pro V2 Satsana duct for Micro Swiss Direct Drive by AstroRyan on Thingiverse: https://www.thingiverse.com/thing:4893486
Micro Swiss Direct Drive by madbuda on Thingiverse: https://www.thingiverse.com/thing:4170190
**_Some STLs are included here for completeness only, please see originating designs for more details._

I offer the design as a starting point, with V2 already in the works. This should allow anyone who just bought a new kit to at least get up and running faster.
Soon to be added:
 - cable routing and attachment points
 - corrected and optimized ducting / airflow
 - alternate mounting holes
 - lighter weight

PS. there are a few goodies in here too, like an extruder knob that comes in different flavors, and a Y end-stop extension plate for those who don't know when to quit. (I feel that MicroSwiss should have given us the heads-up on the end-stop)

And for those who CAD, enjoy the STEP files.

Cheers


MicroSwiss Direct Drive CR10S Pro V2 Fan Shroud - PROPER FIT

A larger knob for the Creality Ender-3 V2 display unit.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: No

Creality Ender-3 V2 display knob

A larger Knob for the Creality Ender-3 V2 display unit.

Creality Ender-3 V2 Display Knob

**Rapid Change Revo RepRap... Really...**

A nozzle holder for E3D Revo nozzles designed to fit onto a 2020 Extrusion.  Great for the top of a machine like the Creality Ender 3.  

Check out this part and the E3D Revo CR hot end in my youtube video: https://youtu.be/tU_5jdhukEc

*Design holds 4 E3D Revo Nozzles.*

----------------------------------------------------------------

- **INCLUDED FILES:**
  - CAD STEP File to learn how I designed these.
  - 2020 Extrusion Revo Nozzle Holder

---------------------------------------------------------------

- **PRINT PARAMETERS:** 
  - 3 Perimeters (Walls/Shells) Recommended
  - 10%+ Infill Recommended
  - 

Mine were printed in Inland "Silk Red" PLA.

--------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

**Want to Buy a Can Cup?** Check out our "Authorized Sellers" List here: https://www.hotrodhippie.com/resellers

--------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. *By downloading this design you are agreeing to these terms.* Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

**PLEASE Credit any and all Remixes of my designs: MandicReally**

E3D Revo Nozzle Holder for 2020 Extrusions

Revo_Nozzle_Storage_2020_V1.step

Are you a fan of Creality, one of the leading brands of 3D printers and accessories? Do you want to store and organize your tools and gadgets in a cool and convenient way? Then you need the Creality Box, a 3D printable model that lets you create your own custom box with the Creality logo.

This box is a remix of the Tool Box by Yanev, but with the Creality logo on the top. It's a new version of my Creality Box but with the logo is rotated 180º to make it read correctly when transporting with the handle and from the back when it’s open and also flat to have same height as the box lid. It also has a latch and handles for easy opening and carrying.

The Creality Box is compatible with all the Tool Box Base models I designed. You can swap the base to create your own customized Creality box with different sizes and layouts. It will also be compatible with the future bases that I will design.

The Creality Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to match your Creality printer.

I created this box as a tribute to Creality, after winning a Creality K1 on the #crealityvidschallenge contest. I wanted to share my gratitude to Creality with the 3D printing community.

Download the Creality Box today and celebrate your love for Creality with this awesome box!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Creality Box Rotated Logo Flat

Adafruit ADXL345 mount for the Creality Sprite Pro Upgrade Kit. You will need an Adafruit ADXL345 and (3) M3-6 screws.

Creality Sprite ADXL345 Mount

This one's for my Fellow Ender 3 Series Buddies!
This is an Ender Series logo of the dragon along with the number 3 showcasing the Ender 3 Series of Printers (Ender- 3/Pro/V2/S1). 
Indeed a good cosmetic add-on for anyone who has these printers.

I designed and printed this for my Ender 3 V2 and placed it onto the Aluminum Profile with the help of these inserts that slide into the profile slots:

**Sliding Inserts for 3D Printer Aluminum Profiles:**
https://social.thangs.com/m/55998

Both the .stl and .sldprt (Solidworks Part) files have been added for direct printing or editing under the license.

**For my Ender 3 V2 Friends out there, I have also added the files for a V and 2 model here:**
https://social.thangs.com/m/56015

Hope you like this!
Thanks!   


Ender 3 Logo

Ender 3 Logo.SLDPRT

The main problem an mostly all Creality printers is the tiny part cooling fan. It's not powerful enough to generate an airflow that'll allow you pushing your printing speeds beyond 50 mm/s, simply because the cooling will fail in critical regions such as overhangs.

Hence, I designed this mod in order to replace the stock blower fan with a 5015 radial fan, which produces a much better airflow. In fact, printing speeds of 100 mm/s even with 80% fan can be achieved easily.

Since the stock hotend shroud won't fit anymore, I also made a replacement for this. You can use it either with the decor piece or without.

**BOM**

You'll need the following items:

- 1 x 5015 radial fan (blower fan)
- 2 x M3 heat set inserts
- 2 x M3 washers
- 2 x - M3x25 bolts
- 1 x Nyloc nut M3
- 1 x JST SMR-02V-B (optional but recommended)
- 2 x crimping contacts BYM-001T-P0.6 (for SMR-02V)
- 1/2 x JST SMP-02V-BC (optional but recommended)
- 2/4 x crimping contacts BHF-001T-0.8BS (for SMP-02V)
- a decent crimping tool (such as the SN-01BM)

As for the JST SMP-02V-BC: you need only one to replace the part cooling fan, but two if you're going to refurbish the stock fan. Same goes for the crimping contacts.

The SMR-02V-B (the longer part) goes to the printer wiring, the SMP-02V-BC (the shorter part) goes to the fan.

Make sure you don't confuse the wires when assembling the JST connectors!
The yellow wire is +24V and the blue wire is GND. Likewise, the yellow wire from the printer goes to the red wire of the blower fan, blue to the black wire. If you accidentally mix them up, it will blow up your blower fan. 

**STL files**
If you're looking for the STL files only, have a look at my [Printables.com](https://www.printables.com/de/model/274961-blower-fan-mount-for-cr-10-smart) account.



Blower fan replacement for the CR-10 Smart

The main problem an mostly all Creality printers is the tiny part cooling fan. It's not powerful enough to generate an airflow that'll allow you pushing your printing speeds beyond 50 mm/s, simply because the cooling will fail in critical regions such as overhangs.

Hence, I designed this mod in order to replace the stock blower fan with a 5015 radial fan, which produces a much better airflow. In fact, printing speeds of 100 mm/s even with 80% fan can be achieved easily.

Since the stock hotend shroud won't fit anymore, I also made a replacement for this. You can use it either with the decor piece or without.

**BOM**

You'll need the following items:

- 1 x 5015 radial fan (blower fan)
- 2 x M3 heat set inserts
- 2 x M3 washers
- 2 x - M3x25 bolts
- 1 x Nyloc nut M3
- 1 x JST SMR-02V-B (optional but recommended)
- 2 x crimping contacts BYM-001T-P0.6 (for SMR-02V)
- 1/2 x JST SMP-02V-BC (optional but recommended)
- 2/4 x crimping contacts BHF-001T-0.8BS (for SMP-02V)
- a decent crimping tool (such as the SN-01BM)

As for the JST SMP-02V-BC: you need only one to replace the part cooling fan, but two if you're going to refurbish the stock fan. Same goes for the crimping contacts.

The SMR-02V-B (the longer part) goes to the printer wiring, the SMP-02V-BC (the shorter part) goes to the fan.

Make sure you don't confuse the wires when assembling the JST connectors!
The yellow wire is +24V and the blue wire is GND. Likewise, the yellow wire from the printer goes to the red wire of the blower fan, blue to the black wire. If you accidentally mix them up, it will blow up your blower fan. 



Blowe fan replacement for the CR-10 Smart

Remixed Ender 5 (Pro, Plus) hotend strain relief for bowden tube and heater/thermistor wiring. Two models, one slightly wider to better fit Ender 5 Plus. See pictures for zip tie locations.

Ender 5 Pro Plus Hotend Strain Relief Simple

Remixed Ender 5 (Pro, Plus) hotend strain relief for bowden tube and heater/thermistor wiring.

Ender 5 Plus Hotend Strain Relief Simple

Anyone with a 3D printer has surely had an unpleasant experience with the heated bed or hotend at least once. it can definitely be quite painful, & for those who don't know about it, it can even be dangerous.

Hence, I've designed some symbols/signs that can be easily 3d printed and mounted onto the bed/hotend assembly using **these mounts: ( https://social.thangs.com/m/61690 )**

The Caution Hot symbols are available in two sizes, regular and large. Regular triangle side length is roughly 46mm and for large it is 56mm.

This design not only works as a safety feature but also as an aesthetic add-on **(check attached pics.)**

Hope you find this design useful! Happy Printing!

Creality

Most Popular of All Time

Categories

Popular

Personalize

Trending