N Concrete Ties 50ft Flat Load

N Concrete Ties 50ft Flat Load.stl

N Concrete Ties 50ft Flat Load - Gray Matte Plastic

N Concrete Ties 50ft Flat Load - Tan Fine Detail Plastic

N Concrete Ties 60ft Flat Load

N Concrete Ties 60ft Flat Load.stl

N Concrete Ties 60ft Flat Load - Gray Matte Plastic

N Concrete Ties 60ft Flat Load - Tan Fine Detail Plastic

Concrete Tic-Tac-Toe Mold

Part Studio 2 - Tic-Tac-Toe Mold.stl

Cement Pen Holder - Two Different Sizes!

Cement Pencil Holder.3mf

CONCRETE PLANTER / DESIGNER DESKTOP ORGANIZER WITH OPTIONAL PLANTER / HOME OFFICE / OFFICE / STL

PLANTER WITH ORGANIZER.stl

Cracked Ground Texture Roller For Polymer Clay, Ground Clay Texture Rolling Pin, Clay Tool, No: 1442

cracked ground.stl

Concrete Blocks Texture Roller For Polymer Clay, Bricks Clay Texture Rolling Pin, Clay Tool, No:1431

concrete blocks.stl

1 -  50 Square Pole 8MM X 240MM.stl

1 50 Square Pole 8MM X 240MM.stl

Fixum Dude Motors PiP Concrete Truck

Print in place concrete truck with rotating wheels and mixing drum. 

Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate.

Prints on its side without supports. Sample printed in Hatchbox Blue PLA on the Prusa MINI+ in .25LH Draft mode, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill. 

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Valkiria | Cabdle holder

half1.stl

Drop | Cement ashtray

cenicero2.stl

DIY Concrete Kettlebell Shell

This is a shell for making your own DIY Kettlebell with concrete!  Just print, and fill with cheap concrete and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

scale to 90% or less for Ender3 size printers to print on its back.

Designed to print on its back, with supports under the handle.  Orienting it this way will give more strength to the handle as the plastic will lay horizontally through the handle instead of radially.  That said, it can be printed with the handle at the top, but will still most likely require supports for the handle.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell

This is a shell for making your own DIY Dumbbells with concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell 2

This is another shell for making your own DIY Dumbbells with concrete!  And this one holds more concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

Concrete

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

N Concrete Ties 50ft Flat Load

N Concrete Ties 60ft Flat Load

Concrete Tic-Tac-Toe Mold

Cement Pen Holder - Two Different Sizes!

CONCRETE PLANTER / DESIGNER DESKTOP ORGANIZER WITH OPTIONAL PLANTER / HOME OFFICE / OFFICE / STL

Cracked Ground Texture Roller For Polymer Clay, Ground Clay Texture Rolling Pin, Clay Tool, No: 1442

Concrete Blocks Texture Roller For Polymer Clay, Bricks Clay Texture Rolling Pin, Clay Tool, No:1431

1 - 50 Square Pole 8MM X 240MM.stl

Fixum Dude Motors PiP Concrete Truck

Concrete candle holder “Gugelhupf”

Valkiria | Cabdle holder

Drop | Cement ashtray

DIY Concrete Kettlebell Shell

DIY Concrete Dumbbell Shell

DIY Concrete Dumbbell Shell 2

Heart planters | Cement mold

Harbor Breeze ~ Vase

1-50 Laydown bucket 3 Cu yard.stl

Marvel Crisis Protocol Base and Fire Hydrant

Square pot mold V1 succulents plants napkins cement epoxy resign plaster