Santa Lantern Holder

Lantern+Shades.stl

Snowflake Gem Tealight Box

This is a screw top round box that scales very well.

The boxes in the picture are printed at 100%, 60% and 40%.

Prints without supports

Scalable Round Screw-Top Box

WINTER BREATH | CHRISTMAS INCENSE HOLDER

CHRISTMAS TREE.STL

Santa Claus Pokeball

Pere Noel.stl

Gift Box

Screw part ribbon.stl

Small Table/Bedside Lamp - LumaTree

LumaTree (Shade).stl

Christmas tree decorations

ALBERO FATTO.stl

KNOMI Christmas Ornament Smirking Face

KNOMI Christmas Ornament Smirking Face Frikarte3D.stl

Print in Place Collapsing Christmas Star

Star collapsing v4.stl

CHUBBY REINDEER FAMILY WITH STABLE / CHRISTMAS DECOR / GIFTSET / TOY / HOMEDECOR

CHUBBY_REINDEERS_LYING-DOWN_BIGGER.stl

Swoop 14 Christmas Finial 2024

Finial Swoop 14 Whole v3.stl

Candy Dispenser Planetary Snowman

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Planetary Snowman

ELF DOOR

PORTA ELFO.stl

Festive Plant Pot 

Santa  plant_tree pot.stl

Winged Kaleidoscope Christmas Ball

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 6.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height or even adding infill. Infill is counter-intuitive, but it means the hot end moves to a different part of the layer, giving the outside a chance to cool. 

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm
* Alternate Extra Layer: Yes

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
I would recommend adding 100% infill to the loop at the top of the ornament to make the loop stronger, but I wouldn't add infill anywhere else. It just adds weight.

To add infill (or extra walls, tops or bottoms) to just one area of an object in Cura:
1. Add a support blocker
2. Select the support blocker and scale and position it where you want the added infill
3. Select “Per Model Settings” then select “Modify Settings for Overlaps”
4. Select “Select Settings” and check “Infill Density” then select “Close”
5. Enter the amount of infill you want

*Speed*
* Outer Wall: 20 mm/sec
* Inner Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for bed adhesion.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

I also added a custom cylindrical support to either side where the bottom ledges intersect. This not only helps with printing the point of intersection, it help prevent the model from wobbling or coming loose from the print plate.

Jingle Bell Highland Cow

Teal Cat Creative Jingle Bell Highland Cow.stl

CHECK ENGINE Tree Topper

Scale to fit your tree
You can see how i made it here https://youtu.be/RXbWhotSBd4

Christmas

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Santa Lantern Holder

Snowflake Gem Tealight Box

WINTER BREATH | CHRISTMAS INCENSE HOLDER

Santa Claus Pokeball

Gift Box

Small Table/Bedside Lamp - LumaTree

Christmas tree decorations

KNOMI Christmas Ornament Smirking Face

Print in Place Collapsing Christmas Star

CHUBBY REINDEER FAMILY WITH STABLE / CHRISTMAS DECOR / GIFTSET / TOY / HOMEDECOR

Swoop 14 Christmas Finial 2024

Candy Dispenser Planetary Snowman

ELF DOOR

Festive Plant Pot

Winged Kaleidoscope Christmas Ball

Jingle Bell Highland Cow

CHECK ENGINE Tree Topper

Dragon Egg (Design 2)

Santa’s Workshop Sign

Tealight Holder || Christmas Chain