35mm camera

Full.stl

Wyze Camera 3 Podcast Arm Mount

Wyze Camera top.stl

30 mm Castor Wheels Adapter for Neewer Studio Light Tripods

I have designed an adapter, which allows you to attach 30 mm Caster Wheels to your Neewer Studio Light Tripods (approx. 20 mm diameter of tripod legs)

**Bill of Materials**
- 30 mm Caster Wheels (with 30 mm Plate)
- M3 Screws (8 mm & 10 mm)
- M3 Hex Nutzs

**Print Settings**

- Filament: 
- Print Temp: 215°C First Layer / 210°C 2nd Layer onward
- Bed Temp: 60°C 
- Perimeters: 3
- Infill: 25%

I am printing with a Creality CR-6 SE, which has a 0.6mm Nozzle

Check out my YouTube Video for more details:
https://youtube.com/shorts/TZYh4HITcCE

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

30 mm Caster Wheels Adapter for Neewer Studio Light Tripods

Simple 2DoF 3D Printed Camera Gimbal

Takumar Fisheye Lens Cap

FisheyeTak-Cap.stl

Gridfinity 1x1 gopro bolt holder.STL

Gridfinity holder made for the bolts used by gopro to mount it. Fits 4 bolts. 
Uses a 1x1 base and is stackable. 
I printed it with base down, no support, otherwise close to default settings for pla. 

1x1 gopro bolt holder.STL

Nikon EL14a | EL14 Battery Case

EN-EL14_case-v2.stl

Ender-3 Max Camera Mount

Ender-3 Max camera mount. Uses the screws on the front of the extrusion frame.
Glued a piece of tin steel to mount a magnet camera.
Might also fit other Ender models

52mm lens cap

52mm Lens cap.stl

Fusion F212 - O3 Airunit Cam mount

35 degrees 31mm - left mount.stl

Beagle camera V3

Wyze Cam Pan Camera mount for Creality and Chowthink 3D printer enclosure

Wyze Cam Pan camera mount. Made this to hold camera on the sides of my Chowthink 3d printer enclosure. Made to attach to these wyze camera mounts https://a.co/d/4k0fBZx

Wyze Cam Pan Camera mount

DSLR Handgriff GoPro.stl

blink_fake_camera.obj

Sony Lens Protector

Lens cap/protector for the Sony e-mount 3.5-5.6 / 16-50 kit lens. 65mm inner dimension may fit other lenses. It just slips over the front and holds on pretty well.

Printed with TPE type filament at a 10% infill provides a nice cushion to help protect against bumps and drops.

**Print Settings**
Rafts: No
Supports: No
Resolution: .1
Infill: 10%
Filament brand: Inland
Filament color: Black
Filament material: TPE

**Notes**:
I printed at .1, but you can probably go with .2

Pi camera mount

Cam front.stl

Camera Lucida Hat Mount

This mount houses a 2x2x1.7cm prism and attaches via the bill of a hat.

Anycubic Kobra Max Camera Mount

This is a camera mount for the Anycubic Kobra Max that mounts on the left side of the Z gantry.

It replaces the blue plastic cover which covers the Y stepper motor pulley and belt.

It provides M2 screw holes for mounting, and a 1/4" hole for a standard 1/4x20 thread to attach your webcam.

I have tested it with the Logitech Brio and Wyze Cam.

To use it, you'll need to run a USB cable down the wiring loom.  In my case, I attached the USB cable to the loom using small zip ties.

The angle of the camera is fixed, which may not be desirable.  If you would like to modify the file, the Tinkercad link is here:

https://www.tinkercad.com/things/fXtmzVg7TiG-anycubic-kobra-max-camera-mount

If you use it, please let me know!  I would love to hear from others in the community.

When placed flat, you should be able to print it without supports.  I recommend standard 0.15mm layer hieght.  PLA is fine as this part will not experience heat.

Leap_Motion_20mm_Tube_Mount.STL

A mount for the Leap Motion Camera designed for attaching to tubular support structures with 20-21mm diameters. Attachment to the tubular support is done via standard hose clamps (ideally 8mm wide) running through the curved groove in the camera mount. Cutouts on either side allow the USB connector to be placed on either side of the mount, supporting both possible camera orientations.

Printed in PLA with the following settings (see also preview image):
20% triangular infill (not that important as infill is minimal)
0.2mm Layer height
6 solid top layers, 4 bottom layers
3 perimeters
with supports

Requires approx. 1.5h print time and 15.26g of material

Gridfinity 2x1 gopro 8 holder.STL

Gridfinity holder made for gopro hero 8. 
Uses a 2x1 base and is stackable. 
I printed it with base down, no support, otherwise close to default settings for pla. 

Camera & Photo Equipment

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

35mm camera

Wyze Camera 3 Podcast Arm Mount

30 mm Castor Wheels Adapter for Neewer Studio Light Tripods

Simple 2DoF 3D Printed Camera Gimbal

Takumar Fisheye Lens Cap

Gridfinity 1x1 gopro bolt holder.STL

View 25 new models

Ender-3 Max Camera Mount

52mm lens cap

View 11 new models

View 14 new models

Wyze Cam Pan Camera mount for Creality and Chowthink 3D printer enclosure

DSLR Handgriff GoPro.stl

blink_fake_camera.obj

Sony Lens Protector

Pi camera mount

Camera Lucida Hat Mount

Anycubic Kobra Max Camera Mount

Leap_Motion_20mm_Tube_Mount.STL

Gridfinity 2x1 gopro 8 holder.STL