Drag Chain for Flying Bear Ghost 5 Catena Portacavi

Attacco Catena Testa.3mf

Vesa Mount Monitor Cable Organiser Hooks

15x50 squarehook.step

Single Gang Sideways Cable Pass Through Wall Plate (2 versions)

Single Gang Sideways Cable Pass Through Wall Plate.stl

Simple cable management for desk

cable management I.stl

Graphics Card Cable Hider and GPU Support Bracket

Graphics Card Cable Hider V2 - Body.stl

Cable snake

This is a design for a 3D-printable cable snake, made out of repeating units that connect together and have flexible joints. 

Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Get ready for spooky season with this spider web lid for the [Desk Grommet System](https://than.gs/m/924318)

Watch the demo clip

Download more lids for the Desk Grommet System.

Remix these to create your own custom lids to fit your needs:
- (REMIX ME) Hexagon Lid: https://than.gs/m/924379 
- (REMIX ME) Round Lid: https://than.gs/m/924377


Six Cable Holder.STL

This is a simple cable holder for 6 cables. Pushing the cables is a bit tight but they fight quite smugly. The total length is around 76mm (3"), the width that cables go in is 7.8mm (0.3") and the corridor that the cable goes through is around 2.7mm (0.1"). This model is similar to other ones I have seen on the database but I made this model from scratch. Attached is the gcode that uses the adaptive cubic infill and is set the bed of 60 degrees and the nozzle to 210, also attached is a STL file and solidworks file for the model.

This is one of my first models so any feedback would be nice :)

Hexagon Lid (6-pointed) for Desk Grommet System

Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

HMG7 Cable Tower Standard Left 10mm.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

VHB Cable Management Mount - Zip Tie wires where you want!

VHB_Cable_Management_V2.step

Double Channel Cable Management Hook

Cable management hook designed to be used with a 3M command strip.

cable comb (wall-mounted cable holder)

cable comb

Cable holder

SKADIS cable clip

Cable Clip.stl

I designed this to be a loose-fitting cable management device, mountable under a table.

I printed this in PLA, no supports are needed. 

Hexagonal Based Wall Wire Beautifier

I'm not drilling into my walls or crawling through the attic to run more cat5 so I made these to at least make the visible cabling look good. PCB style, 45 degree cat5 wall hanger. 3 channels, hexagon footprint for mad cyberpunk style points. I used 3m double sided adhesive foam to mount these.

Cable guide

The hot end cables were dragging along the bed & pushing on the heated bed cables, causing the bed to move up and down during a print. (Ender 3 v2). 

So, I designed this little guide to hold the hot end cables up slightly so they don't interact with the bed. One side of the hook is chamfered so that the cables don't touch any sharp edges as they move. The guide slots into the frame of Ender/other 3d printers on the back left side. 

If you want to cable tie the cables into the guide, then just make sure it has enough slack for the hot end to reach the top right of the print area before tying it. 

It prints without supports, just make sure it's oriented with the long flat side down to the bed. Doesn't require supports.


Cable Management

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Drag Chain for Flying Bear Ghost 5 Catena Portacavi

Vesa Mount Monitor Cable Organiser Hooks

Single Gang Sideways Cable Pass Through Wall Plate (2 versions)

View 44 new models

View 11 new models

Cable snake

Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Six Cable Holder.STL

View 12 new models

View 510 new models

VHB Cable Management Mount - Zip Tie wires where you want!

Double Channel Cable Management Hook

View 15 new models

Cable holder

SKADIS cable clip

Cable Clip.stl

Hexagonal Based Wall Wire Beautifier

Cable guide

Marsgizmo Cable Management Loop