ECX 2WD Caster Blocks

ECX 2WD caster blocks. Fits: Torment 2WD, Ruckus 2WD, Amp MT 2WD, Amp 2WD, Crush 2WD, Amp 2WD, Circut 2WD, and Brutus 2WD.

Le Mans and Hypercars Decor

Calling all motorsports fans! Check out the iconic Le Mans track, where the legendary 24 Hours race takes place. And guess what? This year is extra special because it's the centennial celebration of the 24 Hours of Le Mans. I wish I could be there in person, but hey, I've found a way to bring the excitement to my walls! I've got the track layout and even the silhouettes  of the Hypercars competing this year. It's the perfect decor for any racing enthusiast. Let's rev up the adrenaline and celebrate this historic event!

Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: Yes


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Le Mans.stl

Honda Emblem.stl

The emblem fell off my Honda Civic three years ago.  I 3D printed another, and here it is. 

The original was on my car for three years until it disintegrated in my hand.  It was printed in standard black PLA.  I have no idea how it lasted even one year, haha.

Enjoy this replacement emblem for your Honda (or as a decoration, earrings--anything; just scale it up or down).

Look for more versions soon.


Gear Shifter Container Knob

Shift_Knob_Container_Top.stl

Bumblebee keyring

Bumblebee keyring, bee ware of the cutie that is your very own bumblebee keyring.
If you want the bee stripes just use a black permeant marker and colour it in.
supports type normal 5%.
Printed with a 0.3 nozzle you may want to put a little glue stick down on the bed to help stick the print.

Toyota Yaris GR Key Hanger

gr yaris with logo.obj

big bubble car.stl

This is a toy car I designed a few years ago as part of a board game I made.  The small board game pieces within the car by opening and closing the trunk/boot (also included).

Use support material all over and then finish the toy for a fun little storage container or a gift for a kid.

Enjoy your ride!

Cookie keyring

a nice tasty treat for your keys.
If you want to make the chocolate chips, just colour them in with a permanent marker.

A Shifty Thang.stl

Solid Thangs gear shifter knob.  This is one of many shifter knobs I design for fun.  This particular one is a blank, meaning you drill it yourself and add in the nut that you want.

Or request a size and I'll upload one ready to print and add to a vehicle.  

I print 0.12 resolution and 100% infill.  It takes a good 7 hours, but it's worth it.  

At only 76 grams you can make 14 of these with one roll of filament. A custom shifter knob for less than two bucks!

Saint Patrick's Shifter, 10mm #StPatricksRemix

Saint Patrick is famous in folklore for driving the snakes out of Ireland.  If that story is true, he probably drove them in a truck that had a stick shift.  

Thangs3D is probably the only place lucky enough to have the shifter knob of Saint Patrick himself.  This lucky shifter knob got him out of a lot of situations.  He avoided a falling tree once. He claimed his hand was forcefully drawn to the stick shift, he downshifted, and the tree missed his car.  He was stumped.  

But then he realized it was his lucky Stick Shift knob that was behind his lucky driving.

This is 10mm.  It fits a lot of Japanese cars.  If you want a different thread size let me know, and perhaps you'll be lucky too.

Print it light for fun or 100% to really rock the streets!

#StPatricksRemix from the Logo design of  @mann.alext 

https://than.gs/m/539919


Manual Speed Shifters 10mm Thread

Complete solid.stl

Formula 1 1994-2017 Keychain

This is a keychain with the Formula 1 1994-2017 Logo. It's a simple design with the logo centered in the middle of the keychain. 

This logo is synonymous with F1’s glory days. If you grew up in the late 90s and early 2000s, like me, this is probably the logo most of you remember. Introduced in 1993 and first used for the 1994 season, the logo was created by Carter Wong, a London-based design agency and became a recognisable and much-loved symbol of the sport.

Interestingly, the ‘1’ in Formula 1 isn’t actually found on the red lines on the right but in the white space left in between. Those red lines or ‘speed marks’, helping to create a sense of movement and passion, whereas the use of black on the ‘F’ gave the logo a sense of power.

Regarded as one of the most iconic logos of all time, it wouldn’t last forever… This was the successor [Formula 1 Keychain](https://cults3d.com/en/3d-model/various/formula-1-keychain-magnustor3d)

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change like this:
- White (Layer 0 to 7) 0 to 1,4mm
- Black (Layer 8 to 12) 1,6 to 2,4mm
- Red (Layer 13 to 14) 2,6 to 2,8mm
I recommend using:
[White PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Black PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Red PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Car Brands Coasters

honda.stl

Jdm Legends Coasters

htr.stl

Miata MX-5 Magsafe Cubby phone charger holder

Designed this for a Mazda Miata cubby hole on the driver left side. It fits really well but may want to double side tape it down so it doesn't pop out ever or come with your phone. Designed it to where you will drill a hole in the back of cubby for the cable to go through.

The phone BARELY fits width wise in that cubby, and may slightly stick out of the cubby length wise. If you have a fat case you may not fit in there.

Miata Magsafe Cubby phone charger holder

Basic Traffic Cone

A simple, basic traffic cone created while working on a dual-extrusion cone for my son's cars.

Wall Riders : JDM Legends

supra.stl

cup holder1.obj

car ashtray cup holder made fro 2 parts. printed in petg.

Ratchet Wrench and 10mm Keychain

If printed right can unscrew some bolts and nuts , not to be used as an normal ratchet wrench , and there is no ratchet  You can see how i made it here https://youtu.be/butZu2q52R0

CARS

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 11 new models

Le Mans and Hypercars Decor

Honda Emblem.stl

Gear Shifter Container Knob

Bumblebee keyring

Toyota Yaris GR Key Hanger

big bubble car.stl

Cookie keyring

A Shifty Thang.stl

Saint Patrick's Shifter, 10mm #StPatricksRemix

Manual Speed Shifters 10mm Thread

View 12 new models

Car Brands Coasters

Jdm Legends Coasters

Miata MX-5 Magsafe Cubby phone charger holder

Basic Traffic Cone

Wall Riders : JDM Legends

View 12 new models

Ratchet Wrench and 10mm Keychain

Piston Skull Coaster