Wind Turbine Project

Wind Turbine Example v1.stl

Whirlpool Mastermind Chrome AC remote wall Mount

LG inverter AC Remote Wall Mount

OctoBenchy_SUNLU

This Octobenchy was designed by SUNLU. It is a variant of the classic Benchy, which is commonly used for 3D printer testing. This model provides a more stringent test for 3D printers. Note that this model is a print-in-place model that needs NO support. If you want 3D print models as perfect as the ones pictured, please 3D print using SUNLU filament: https://www.sunlu.com/

3D PRINTING SETTINGS
PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interior Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO

Benchy with octopus

Filament Clip_SUNLU

This filament clip was specially designed by SUNLU for 3D printing users. It helps prevent 3D printer filament from tangling during printing. This clip can be 3D printed using standard PLA filament. If you're looking for affordable 3D printer filament, check out: https://www.sunlu.com/

Filament Clip

Gameface GF600 8-round magazine

Rockus Caesar Pen/Pencil Holder

Dart Zone Tomahawk Dart Pusher

Google Home Stand with Cable Management

I don't like cables, so I have designed this Google Home Stand with Cable Management. The power cord rolls up inside the stand.

It is super easy to print, no supports needed.

Optional: To keep it from vibrating when playing music on higher volume, you can glue in 9 mm rubber feet.

**Print Settings**

- Filament: White PLA - https://geni.us/FavFilament
- Print Temp: 210 °C
- Bed Temp 60 °C
- Perimeters: 4
- Infill: 25%

I am printing with a Creality CR-6 SE & Ender 3 V2

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

Nintendo Switch Stand set

Honeycomb Spool Holder

This simple spool holder is made to sit beside your 3D printer so that you do not need to rely on the original spool holder the printer comes with. It is meant for most (inner hole of spool must be 43mm or larger to fit) spools of filament 1kg or less. It has a modern aesthetic that culminates with the hexagonal pattern on its side wall.

Tennsco workbench shop table flared leg outlet box single gang

Filament guide.stl

This a small upgrade that can help you avoid filament detector problems. Easy mounted without any screws and glue.

3D printed filament guide model for Anycubic Vyper.
Filament type: PLA (Black).
Temperature: 210 degrees.
Layer hieght: 0.15 mm.
Infill: 50%.
Print time: ~  20 - 30 min (depending on your settings).

NASA Mars InSight Lander

https://nasa3d.arc.nasa.gov/detail/insight_cruise_lander

Panda

Ender 3 spool holder.stl

new ender 3 filament holder.stl

Bambu Labs x1 Carbon Filament direction changer pulley

Neatly guide the filament into the printer to increase the dependability of the machine. the only outside hardware required is the standard roller skate 608 bearing with whatever suffix of your choosing, some super glue to secure the pulley around the bearing once inserted and a longer bowden tube (needs to be about 2 inches longer than stock. This has been designed for PETG, A nice slippery material. I recommend darker colors as bright PETG doesn't take as well to cyanoacrylate (super) glue. I imagine a bearing really isn't needed, you could make your own pulley for the spindle, but i like to over engineer things. For Print setting I recommend top and bottom at 1.4 mm (7 layers) , side walls at 5 layers and 15% or more gyroid infill. this device is strong enough to pick up a full spool of filament, in the drier and pull the bowden tube into the pulley without noticing.  When installing the device the screws only need be snug plus. The bowden Tube only need stick out of the end of its place of security about an inch or less. the filament is always going to wobble around a bit to it's good the tube stick out enough to flexible. the filament extender should be away enough from the printer so the tube gracefully curves, you'll know it's graceful if you can push the filament smoothly into the printer. 

Business & Industrial

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wind Turbine Project

Whirlpool Mastermind Chrome AC remote wall Mount

LG inverter AC Remote Wall Mount

OctoBenchy_SUNLU

Filament Clip_SUNLU

Gameface GF600 8-round magazine

Rockus Caesar Pen/Pencil Holder

Dart Zone Tomahawk Dart Pusher

Google Home Stand with Cable Management

Nintendo Switch Stand set

View 15 new models

Tennsco workbench shop table flared leg outlet box single gang

Filament guide.stl

View 12 new models

Panda

Ender 3 spool holder.stl

Bambu Labs x1 Carbon Filament direction changer pulley

Hydroponic Aeroponic Garden Tower

Caliper Stand

View 34 new models