Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6098407.

Metal peg board hanger version of the 'wood peg board hanger' model. Designed to fit onto thin metal peg boards.

Same parameters as the 'wood peg board hanger' model are available to alter. 

Steel peg board hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6096377.

EDIT: REDESIGNED FOR WOOD PEG BOARD. REFER TO STEEL PEG BOARD HANGER FOR HANGER DESIGNED FOR THIN METAL PEG BOARD

Pegboard hanger designed to be attached onto a (wood) pegboard with .250" through holes spaced an inch apart (center to center). Whether you want this hanger to either be a complete top open box or used to hold a removable container with the corners option, this design is capable of adjusting to your needs. Variables that can be adjusted are the hanger width, depth, heights, hook spacing, wall spacing and sizes, and lip spacing. 

No supports needed.

Review design (if adjusted) before printing.

File has been reuploaded to fix previous fit issue.

Wood Peg board hanger

Edit: Does not securely fit on either a thin steel board or wood board! Refer to the 'Wood Peg board hanger' for use on a wooden peg board, and the 'steel peg board hanger' for use on thin steel peg board!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6096377.

Pegboard hanger designed to be attached onto a pegboard with .250" through holes spaced an inch apart (center to center). Whether you want this hanger to either be a complete top open box or used to hold a removable container with the corners option, this design is capable of adjusting to your needs. Variables that can be adjusted are the hanger width, depth, heights, hook spacing, wall spacing and sizes, and lip spacing. 

No supports needed.

Review design (if adjusted) before printing.

Peg board hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6092633.

Tray for the Nintendo Switch stand set. Capable of holding the comfort grip securely and other items. Take out the tray by lifting and pulling out.

Nintendo Switch tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6083714.

Nintendo switch stand was designed to be modular with storage. The Nintendo Switch stand has slots which can secure parts featuring slot extrusions such as the steps. Steps are designed to hold game cards. Currently, this print set can hold the switch docking station, game cards, comfort grip, and other small items. More models are planned to be created for this set such as a drawer.

This set was printed with White PLA and wooden PLA (mimic steps in Mario games). Stand was printed on the back side and the steps were printed on bottom side (support used on extrusions, peels off easily). Resin may be a more suitable option, but testing is needed to verify. 

Due note models in the CAD files differ from camera pics. Models were revised to compensate for errors found in first print and also strengthen parts.

To ensure the slots work properly, print the 'Nintendo switch slot sample test' and 'Nintendo switch slot tester', then test the fits. If the slot tests work, the slots in the models should work as well.

Nintendo Switch Stand set

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6073508.

First test tray I have made using a Phrozen: Sonic Mighty 4k resin printer. Mistakes were made during and after the print process, but this is how we learn. Besides that, the features such as holes and tapered cuts came out well. Used Phrozen's Aqua Blue as the test, but any resin is suitable for use. 

Taper is 45* starting from inside (rectangle is 10mm by 5 mm) and expanding to the outside. Circles are 5mm in diameter. Part has maximum dimensions of 84 x 100 x 150 mm.

Provided SCAD, STL, and OBJ files (non contain embossment on the front) with this model.

Resin Tray

Designed to handle the cold in both forms, ice and liquid. The cold one is capable of scrapping ice off of your vehicle, then cracking open a cold canned/bottled beverage to chill. Can be attached to a key chain for convenient carry.

No supports are needed to print the model. The presented model was printed with PLA using 50% cubic infill. Provided stl file does not contain embossed logo.

*The model is ideal for right handed people, but can be adjusted for left handed by mirroring the model across the base plane. Advised to deburr rough edges from print.

The Cold One

Just another engineer sharing 3d prints.

Thingiverse page: 
https://www.thingiverse.com/codacmoment

Cults3d page:
https://cults3d.com/en/users/codacmoment-3d

Printables page:
https://www.printables.com/@Codacmoment_887232




Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow