Small Gift Box w/ Insert for up to 8 AA Batteries

gift box lid_AA batteries_8x2slot_karenchaudesigns.stl

Minimal 21700 Holder

Lithium cells are great - high capacity, higher voltage and current than household batteries. But you don't want to just throw a lithium battery in to your bag because they can be a fire risk if shorted.

I saw a simple 18650 holder that was two caps that were held together with elastic bands (https://thangs.com/designer/Nf1nk/3d-model/18650%20holder%20%281%29.stl-861781). However, I also have 21700 batteries, and this one wouldn't work with those. So I whipped up a simple FreeCAD project that could be easily modified for most common sizes.

Print two and insert up to three 21700 batteries. Secure the two caps with hair elastics.

The original on Thangs had no license specified. It's a pretty trivial object so do with it what you will. I am also uploading a version for 18650 batteries.

charged.stl

Camera battery charge wall mount .stl

Wall mounted battery charger holder, designed to work with a stock canon battery charger but should probably work with other brands. Power cord is routed around the charger through the clips down to the wall plug. Textured back of the print allows for sticking the holder to the wall with double sided tape but it can also be screwed through the holes on the sides.

I printed mine with standard PLA at very low infill and wall thickness to allow for some flex so the charger can be easily removed if needed. If the model is printed with the filament color closely matching the wall color, in blends nicely and is hardly visible.

peg-canonbattery-lp-e8.stl

These bad boys are meant to hold Canon LP-E8 Batteries (used for their T-series cameras) when they are in their cases. 

Made for use with standard pegboards with 1/4" holes spaced 1" apart

Mi scale 2 battery cover

Created this because I added a DC supply mod to the Mi Scale 2 that requires cutting a hole in the battery cover for the wire to pass through. I will elaborate in another design post.

Does not work as well as the original, good enough for me. Supports are required only at the latches.

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
Mi Body Composition Scale 2
https://s.click.aliexpress.com/e/_DCVhjRN 
^^^^^

Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j 

For Amazon affiliate links
https://wp.me/peMLu6-2C 

Peg Anything // Battery Holder for GH6, GH5, Sony, DMW-BLF19E, NP-F550, RP-BC009, NP-F330 F550 F570

Keep your camera/lighting batteries organized with these custom pegboard mounts for compatible Panasonic and Sony batteries.

Compatible Battery Models:

Panasonic Dmw-BLF19 and Panasonic Lumix DC-S5, DC-S5 II, DC-S5 IIX, GH5 II, GH6, S5II, S5IIX, S5M2, S5M2X, GH5M2

Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917

X-wing Battery Holder

Small desktop battery holder shaped like an X-wing. Keep up to 11 batteries handy in this Star Wars inspired holder. 

Keep up to 4 - AAA, 4 - AA, 2 - C, & 1 - 9 Volt battery handy on your desk with this X-wing battery holder.

Should print on its back without supports.

CR2025 Battery Box

CR2025 V1.23.3mf

AA Battery Box

AA V1.25.3mf

CR2032 Battery Box

CR2032 Box V1.23.3mf

AAA Battery Box

AAA V1.25.3mf

AAA Battery pack

AAA Battery pack for motor, I use to screws on the head towards the inside and hot glued them inside the holes, you can remix this and fill the holes to make it a spring pack like in stores , sadly i'm to lazy to-_-

Sony Battery Holder x4 (NP-FW50)

Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. Also check out my 6 battery version.

NOTE: Works with Sony A7,A7II and other Sony products that use the NP=FW50 Battery.

**PRINT SETTINGS:**
PLA
0.2mm height
No Supports required



Remixed: https://www.thingiverse.com/thing:2567512 adding 4 batteries, made it stronger in almost every way, fast/easy push battery release, added logo text.



Miady 6 Ah LiFePO4 Battery

(https://www.amazon.com/Miady-Phosphate-Rechargeable-Self-discharge-Replacement/dp/B07Q7FY8CC/ref=sr_1_5?crid=3CRQ940E1QTH7&keywords=miady+6ah&qid=1690689652&sprefix=miady+6ah%2Caps%2C98&sr=8-5)

Nine V battery crate #FunctionalArt

stackable crate to store your nine v battery's.
No supports needed.
This version will be stackable with all other battery crate versions that i upload
If you like to sell my prints or just support me then join my membership plan.
#FunctionalArt

Double A battery crate #FunctionalArt

stackable crate to store your AA battery's.
No supports needed.
This new version will be stackable with all other battery versions that i will upload
If you like to sell my prints or just support me then join my membership plan.
#FunctionalArt

Triple A battery crate #FunctionalArt

stackable crate to store your AAA battery's.
No supports needed. 
If you like to sell my prints then join my membership plan.
#FunctionalArt


AAA Battery Holder

Wall mount that holds 4 AA batteries. I use mine to hold rechargeable batteries next to the charger.

Battery

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Small Gift Box w/ Insert for up to 8 AA Batteries

Minimal 21700 Holder

charged.stl

Camera battery charge wall mount .stl

View 78 new models

Mi scale 2 battery cover

View 21 new models

X-wing Battery Holder

CR2025 Battery Box

AA Battery Box

CR2032 Battery Box

AAA Battery Box

AAA Battery pack

View 14 new models

Miady 6 Ah LiFePO4 Battery

Nine V battery crate #FunctionalArt

Double A battery crate #FunctionalArt

Triple A battery crate #FunctionalArt

View 14 new models

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]