Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

Gridfinity AA Battery Holder

An extension of #GridFinity by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

A standard 2x2x3 AA Battery holder. Holds 25, with convenient tapers to allow the batteries to slide in easily. I made sure to add a bit of extra space as rechargeable batteries are often thicker than standard.

#Gridfinity Holder-2x2x3-25AABatteries

Gridfinity AAA Battery Holder

A standard 2x1x3 AAA Battery holder. Holds 21, with convenient tapers to allow the batteries to slide in easily.

An extension of #GridFinity, open sourced by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

#Gridfinity Holder-2x1x3-21AAABatteries

Cargo Containers: Battery Storage

Assembly View Only  -  DO NOT PRINT.3mf

Gridfinity compatible 1x1 9xAAA battery holder.stl

A gridfinity compatible AA battery holder. Holds 9 AAA batteries. Can't be stacked. 1x1. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

Gridfinity compatible 1x1 9xAAA battery holder v1.stl

Xbox Series S Mini-Fridge – A Stylish Gaming Organizer

Xbox_Series_S_Fridge-BOT_Holoprops.stl

Dewalt Battery Holder

Dewalt Battery Holder.stl

Gridfinity compatible 1x1 4xAA battery holder.stl

A gridfinity compatible AA battery holder. Holds 4 AA batteries. Can't be stacked. 1x1. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

1x1 AA battery holder.stl

Multiboard Modular Battery Holders

Multiboard Modular Battery Holder - CR123.stl

Gridfinity CRXXXX Battery Bin Collection

This is a collection of Gridfinity compatible bins that hold all of your tiny CR style lithium cells. I have a variety of sizes so far and am currently making more. In the future I will add some mixed ones that can hold multiple types of button cells at once. Happy Printing!

Gridfinity 1x1x2 CR927 x21 Battery Bin.stl

Dewalt Battery Holder for Multiboard/Multipoint

Gridfinity AAAA and 9v Battery Holder

A standard 2x1x3 Battery holder. Holds 8 AAAA Batteries and 4 9v Batteries with convenient tapers to allow the batteries to slide in easily.

An extension of #GridFinity, open sourced by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

#Gridfinity Holder-2x1x3-8AAAAand49vBatteries

Power Station

Assembly View Only (Do Not Print).3mf

Spooky Mushroom Cable Holder

Spooky_Mushroom_Cable_Holder-Body.stl

Potion Stash Holoprops

Potion_Stash_Holoprops.stl

Gridfinity Milwaukee Battery Holder 2x2

A Gridfinity compatible 2x2 holder for Milwaukee batteries that even lets the batteries lock into the model. If you use the standard 6mmx2mm magnets in the holes provided they should be strong enough to hold this in place on the base plate while the battery slides out, provided that you push the release buttons on the battery all the way in as you take it off. There is an overhang towards the top of the model that not all filaments will handle well, with PLA it did bridge okay for me and a hobby knife makes short work of any small drooping pieces.  Happy Printing! 

Girdifinity 9 Volt Battery Holder

Holds 5 standard 9 volt batteries in a 2x1 grdfinity slot.

The slots of the batteries are designed to fit the largest allowed size for 9 volts, so they likely fit your batteries loosley.

X-wing Battery Holder

Small desktop battery holder shaped like an X-wing. Keep up to 11 batteries handy in this Star Wars inspired holder. 

Keep up to 4 - AAA, 4 - AA, 2 - C, & 1 - 9 Volt battery handy on your desk with this X-wing battery holder.

Should print on its back without supports.

AA Battery Box

AA V1.25.3mf

Gridfinity compatible 1x1x1_5 4xAA battery holder.stl

A gridfinity compatible AA battery holder. Holds 4 AA batteries. Can be stacked. 1x1 and 1.5 high. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

Batteries

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Gridfinity AA Battery Holder

Gridfinity AAA Battery Holder

Cargo Containers: Battery Storage

Gridfinity compatible 1x1 9xAAA battery holder.stl

Xbox Series S Mini-Fridge – A Stylish Gaming Organizer

Dewalt Battery Holder

Gridfinity compatible 1x1 4xAA battery holder.stl

Multiboard Modular Battery Holders

Gridfinity CRXXXX Battery Bin Collection

Dewalt Battery Holder for Multiboard/Multipoint

Gridfinity AAAA and 9v Battery Holder

Power Station

Spooky Mushroom Cable Holder

Potion Stash Holoprops

Gridfinity Milwaukee Battery Holder 2x2

Girdifinity 9 Volt Battery Holder

X-wing Battery Holder

AA Battery Box

Gridfinity compatible 1x1x1_5 4xAA battery holder.stl