Poker Cards Magnetic Fidget Toy

Poker Cards (Single Color File).stl

Pre-Painted Bambu 3MF Low Poly Luvdisc Pokemon - Fan Art

LuvDisc LowPoly Pre-Painted.3mf

Bambu Lab - Fresh Air Fan 40mm Fan Mod!

Bambu_Fresh_Air_Fan_20mm_V4.stl

Bambu Lab waste chute

Rytek bambu Chute.stl

X1C Tool holder Front door(remix).stl

This is a front door attachment for the mini X1C tool holder model that allows for easy painting in bambu studio for maximum realism in comparison to an actual Bambu Labs X1C.

Original model below:

https://cults3d.com/en/3d-model/bambu-lab-mini-tool-holder-ee18c426f9a84fb356fd

See Through Bambu X1C Waste Bins

Bambu Waste Bin XL.stl

Bambu Lab Filament pulley for carbon x1

Change the direction of the filament to guide it into the machine in a gentle way, placing the spool it a better orientation.

Recommended Material and settings:

PETG – dark color
Bottom and top layer 1.4mm 7 layers
5 layer wall thickness
Gryoid infill at least 15%
Plate: textured PEI plate with glue only on the parts for the calibration extrusions. No brim required.
Order of inner wall/ outer wall/ infill: infill, outside, inside or outside, infill, inside (i’ve switch to the former for most prints but I think I did particular machine with the later, I made this a few months ago and don’t remember, good luck)

Hardware Required
608 sized bearing
Super (cyanoacrylate) glue
1 Meter Bowden Tube

Assembly:
Press bearing into pulley, the glue flange over bearing – dark PETG colors glue better than light colors
Put assembled bearing onto spindle, place bracket over spindle and bracket locator, screw short screw into bracket locator – snug plus tightness is good enough

Insert new bowden tube into printer, the new tube only needs to be and inch or two longer, I recommend cutting it after you have the assembly somewhat located.

place assembly over filament spool holder, insert bowden tube into assembly, sticking out about an inch past it’s place of securing towards the pulley. Enough that the tube can flex a bit as the filament will move around a bit. 

Ensure the bowden tube is graceful in its curving into the machine (to test you can push filament through the tube to test it’s ease of insertion), once satisfied place the threaded block on the underside of the machine and the longer screw through the assembly into the block. Tighten snug plus.

If you don’t know how to use the device at this point you should now have profound feelings of everlasting shame and may whatever deity you worship have mercy upon your wretched soul. 


Other notes:

The bracket is strong enough to pull the bowden tube tight, pick up a full spool of tangled filament, the dry box it is in,  and all your frustrations at a failed print (I wouldn’t know, that’s just what a friend told me) without noticing. 

P1P Drawer compatible with 4x4 gridfinity #ThangsBambuContest

This is a P1P Drawer campatible with 4x4 gridfinity. Allows for 5x2mm magnets to make sure the drawer stays closed. #ThangsBambuContest

P1P Drawer campatible with 4x4 gridfinity #ThangsBambuContest

Bambu X-1 Glass Top Riser ONE Piece remix

Bambu_Top_Glass_Riser_ONE_PIECE_V1.step

Bambu - X1 and P1 Bed Clips

Bracket large x2.stl

Bambu P1P - X1 Top Glass Adapter

P1P Glass Top Backer L1_Magnetic Version.stl

Bambu AMS Feeder PTFE Adapter v2.0

BL-PN-04-PTFE-BLANK_v2.1.stl

Gridfinity Bambu X1C Nozzles.stl

A 1x1 Gridfinity Bambu Lab Nozzle holder.

Holds 2 nozzles. Prints fine at 5% infil.

Zack Freedman is the man for creating Gridfinity.

Bambu labs

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Poker Cards Magnetic Fidget Toy

Pre-Painted Bambu 3MF Low Poly Luvdisc Pokemon - Fan Art

Bambu Lab - Fresh Air Fan 40mm Fan Mod!

View 36 new models

X1C Tool holder Front door(remix).stl

See Through Bambu X1C Waste Bins

Bambu Lab Filament pulley for carbon x1

P1P Drawer compatible with 4x4 gridfinity #ThangsBambuContest

Bambu X-1 Glass Top Riser ONE Piece remix

Bambu - X1 and P1 Bed Clips

Bambu P1P - X1 Top Glass Adapter

Bambu AMS Feeder PTFE Adapter v2.0

Gridfinity Bambu X1C Nozzles.stl