3D Maze Box (Costumizable puzzle!)

Ball.stl

Soccer Ball Layered Fidget

Soccer Ball Layered Fidget.3mf

Master Ball

This Ball will never fail when catching a Pokemon

Astrolabicon Pro Classic

astrolabicon-classic.stl

Collapsing Morningstar

MORNINGSTAR-BALL.stl

Skull christmas tree ornament

Skull christmas tree ball.stl

Vortex Balance Sphere fidget spinner

Vortex_sphere_Sphere.stl

Encapsulated Ball Fidget

CGD_Ball_In_Cube Final.3mf

Kwiblet Puzzle

kwiblette_14mm.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

FIDJ Puzzle

fidj.stl

Basket Brands

Plain Seam and Surfaces Combined.stl

Red Koopa Shell

This is a Koopa shell but from a Red Koopa

Finger Football Kit (soccer game on the table!)

Football Shoe.stl

Hybrid Hanging/Desk Baseball Lamp

Introducing the mesmerizing Hybrid Baseball Lamp. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them safe when not in use.

To bring the Hybrid Baseball Lamp to life, you'll need a lamp socket and a bulb. For an enchanting display, I recommend using a Multi-color LED bulb. Depending on your location, you can find suitable options through the following links:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
To create this, you only need to print the numbered files. The additional files are included in case you require separate prints. When printing the Baseball model, use a 0.4 mm nozzle or set a line height of 0.2 mm and a width of 0.4 mm. The domes can be challenging to print, but I recommend slowing down the layers at the top to 50% print speed (around layer 670). Achieve optimal strength by using 100% infill with concentric infill, or you can set your wall count to a higher value, such as 40. Basic white PLA works perfectly; I used Sunlu White PLA+ for my model. Avoid matte or glitter filaments as they may not produce the desired effect. No supports are required for printing.

For the legs and plate, no supports are needed. For a visually appealing result, try positioning the seam on the inside of the legs. Feel free to choose any color that suits your taste.

Enjoy the captivating beauty of your completed Hybrid Baseball Lamp! If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more incredible lamp designs or stay tuned for upcoming releases. Here are some other mesmerizing hybrid lamps you might like:

Mercury: https://www.thingiverse.com/thing:6062935
Pluto: https://www.thingiverse.com/thing:6058417
Sun: https://www.thingiverse.com/thing:6036612
Mars : https://www.thingiverse.com/thing:6036600
Jupiter: https://www.thingiverse.com/thing:6036586
Football: https://www.thingiverse.com/thing:6036569
Asteroid Vesta: https://www.thingiverse.com/thing:6036559
Basketball: https://www.thingiverse.com/thing:6036547
Venus: https://www.thingiverse.com/thing:6034731
Moon: https://www.thingiverse.com/thing:6034515

Please keep in mind that this design is intended for non-commercial use only.

BALL

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

3D Maze Box (Costumizable puzzle!)

Soccer Ball Layered Fidget

Master Ball

Astrolabicon Pro Classic

Collapsing Morningstar

Skull christmas tree ornament

Vortex Balance Sphere fidget spinner

Encapsulated Ball Fidget

Kwiblet Puzzle

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

FIDJ Puzzle

Basket Brands

Red Koopa Shell

Finger Football Kit (soccer game on the table!)

Hybrid Hanging/Desk Baseball Lamp

Floating Eye Tealight Stand or Wall Mount

Spheres wall art

Switch Lite Fireball Dock

KWOB Puzzle // Chamfered

Eggball (Basketball)