Mandalorian Helmet

Series/Movie accurate Mandalorian helmet. 

3D Printable Model, with STL files.

Scaled to size.

STEP file included.

A Boba Fett Helmet will also be uploaded shortly.

Please let me know what you think.

Check out my other models at:
https://thangs.com/mattias.hellberg.95

The Mandalorian Helmet.STEP

Hextraction Secret Tiles

Secret Flipper Example Assembly - Dont Print.step

Collapsing Katana V2 Print-in-Place

**Collapsing Katana V2**
_Print-in-Place Version_

I updated the Katana with a new guard and handle wrap. This version prints complete all as one piece. 

The [Replaceable Blade Version]( https://than.gs/m/910638) is available to my Thangs members. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)


KATANA_SQ_PNP.stl

Hextraction Sozu Tile

Sozu Tile assembly - don't print.stl

Magic Planetary Egg Container

**Magic Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

This egg is similar to the original [Planetary Egg Container]( https://social.thangs.com/m/53994), but I wanted to better hide the layer seem so I added details to the outside of the egg to better hide it. 

**Other Egg Containers:**
[Original]( https://social.thangs.com/m/53994)
[Mini](https://social.thangs.com/m/55450)
[Mega](https://social.thangs.com/m/54270)

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer with Matterhackers [Quantum]( https://www.matterhackers.com/store/l/matterhackers-quantum-pla/sk/MS2XWRUN?aff=7457)(aff.) dual color filament. 

#MakerMadness
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


MAGIC PLANETARY EGG CONTAINER.stl

StormTrooper Helmet With Interior Details

Collapsing Multi-Color Drill Sword

DRILL SWORD-MULTI-GUARD POMMEL.stl

Radial Rib Vases

Radial Rib Vase (Large).stl

Hellboy - Fanart Model

"hey...Stinky!" 

Hellboy is a fictional superhero created by writer-artist Mike Mignola. The character first appeared in San Diego Comic-Con Comics #2 (August 1993), and has since appeared in various eponymous miniseries, one-shots and intercompany crossovers. The character has been adapted into two live-action feature films in 2004 and 2008 that starred Ron Perlman in the title role, and two straight-to-DVD animated films, as well as three video games – Asylum Seeker, The Science of Evil, and recently as a playable character in Injustice 2. A film reboot starring David Harbour is set for release in 2019.

A well-meaning half-demon whose true name is Anung Un Rama ("and upon his brow is set a crown of flame"), Hellboy was summoned from Hell to Earth as a baby on October 5th (given as his birth date by Mike Mignola[1]) by Nazi occultists (spawning his hatred for the Third Reich). He was discovered by the Allied Forces; amongst them, Professor Trevor Bruttenholm, who formed the United States Bureau for Paranormal Research and Defense (B.P.R.D.). In time, Hellboy grew to be a large, red-skinned adult with a tail, horns (which he files off, leaving behind circular stumps on his forehead), cloven hooves for feet, and an oversized right hand made of stone (the "Right Hand of Doom"). He has been described as smelling of dry-roasted peanuts. Although a bit gruff, he shows none of the malevolence thought to be intrinsic to classical demons, and has an ironic sense of humor. This is said to be because of his upbringing under Professor Bruttenholm, who raised him as a normal boy.

7x7 Multiboard Side Legacy Tile x4 Stack

7x7 Multiboard Side Tile x4 Stack.stl

4x4 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Ironing Stack

4x4 Multiboard Core Tile x4 Stack.stl

7x7 Multiboard Corner Legacy Tile x4 Stack

7x7 Multiboard Corner Tile x4 Stack.stl

4x4 Legacy Tiles - 3x3 Board - Ironing Stack

4x4 Multiboard Starter Stack.stl

Planter with Legs - The Lloyd

Lloyd Pot 4.5.stl

Full-sized Anatomically Correct Articulating Spine

Lumber Vertebrae Display.stl

Collapsing Jian

This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long. The sword was designed per a request I received from Naomi Wu the "SexyCyborg". She wanted a version of the collapsing sword from her culture. I thought it was a great idea and was happy to design her one. 

The sword is designed to be printed with a ,4mm nozzle, with a line thickness of .43 so the blade will be two shells thick.
If you have any issues printing, check out my [troubleshooting video.]( https://youtu.be/YQV4PYJPhx0)
If you want to see the history of these swords check out this [video.]( https://youtu.be/xN0H9npkkP4)
https://youtu.be/xN0H9npkkP4
You can see the Jain in Naomi's [video]( https://youtu.be/coIgR2u9XrQ) of the [Ender 5 Plus.]( https://amzn.to/3jsrgay) 
If you would like to support future projects please follow the affiliate link to the [Mystic Brown filament]( https://amzn.to/2ZA4lwX) I used.


COLLAPSING Jian

Caterpie - Pokemon - Fan Art

Caterpie - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Planter with Drip Tray - The Clifton

Clifton Pot 2.5.stl

Red Eldtritch Telehorror

feral_body.stl

Coiled Rope Mug

This coiled rope mug is made with a single loop of “rope” that coils up and then loops back to the beginning to form the handle.

See here for video: https://youtu.be/Ca8gKzsuz5Q 

See here for matching pieces:

Coiled Rope Mug:
Coiled Rope Vase:

Similar Coiled Rope Designs:

Nesting Rope Bowls:
Small: https://than.gs/m/811394 
Medium: https://than.gs/m/811395 
Large: https://than.gs/m/811397 


Automotive tire

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mandalorian Helmet

Hextraction Secret Tiles

Collapsing Katana V2 Print-in-Place

Hextraction Sozu Tile

Magic Planetary Egg Container

StormTrooper Helmet With Interior Details

Collapsing Multi-Color Drill Sword

Radial Rib Vases

Hellboy - Fanart Model

7x7 Multiboard Side Legacy Tile x4 Stack

4x4 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Ironing Stack

7x7 Multiboard Corner Legacy Tile x4 Stack

4x4 Legacy Tiles - 3x3 Board - Ironing Stack

Planter with Legs - The Lloyd

Full-sized Anatomically Correct Articulating Spine

Collapsing Jian

Caterpie - Pokemon - Fan Art

Planter with Drip Tray - The Clifton

Red Eldtritch Telehorror

Coiled Rope Mug