Michelangelo Teenage Mutant Ninja Turtles 2D-Art.3mf

Michelangelo Teenage Mutant Ninja Turtles 2D-Art Frame
Michelangelo Tartarugas Ninja 2D-Arte  Quadro

Supports:
No

Resolution:
0.2

Infill:
10%

Notes:
Easy to print

Spring Latch Keychain

Spring Latch Keychain.step

simple afc nfc ffl trophy

simple afc nfc nfl trophy

Porsche

Apple Watch Series 7

Planetary Egg Container

**Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)



adapter s9 to 150mm fan

adapter-s9-150mm.step

Speaker HIFI *(Work in progress!)

SpeakerHIFI_v2.3mf

Modern Planter 001

Tall Planter 01.STEP

Diatone Q33 insta360 GO minimal camera mount

This is a minimalistic insta360-GO camera mount for the Diatone Q33 tiny RC cars. It is a combination of minimicroFPV's design (https://www.thingiverse.com/thing:4317063) and Diatone's 3D file.
I printed it in TPU and screwed it onto the canopy of the car with truss screws (make sure you use screws with very slim head, otherwise it will touch the battery and push the motor cover - which can make the motor bind).

More info and 3D printing footage in this video: (coming soon)
Disassembly video can be found here:

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Tentaku Plate v1.stl

Replaces the acrylic plate for the Tentaku Mechanical calculator. Mine broke during the build so I had to print a new one!

Voronoi Lamp Shade open

Voronoi Lamp shade 280mm diameter 164mm high, 30mm hole for lamp holder.
Designed for my sons bedroom, where its printed in transparent blue filament.
Two designed one open hole that projects the pattern out, one holes filled with thin layer that defuses the light.
Its quite chunky voronoi so its pretty sturdy and prints easily.
Print out of heat resistant filament (ABS,ASA etc.) or use low wattage LED bulbs so should it be safe with PLA/PETG, i.e. don't be stupid and burn your house down.
Needs a 300mm bed to print comfortably.
~54 degree angle for overhang quite easy for most printers with decent cooling.
Looks good with transparent filament as well as opaque.
I Printed 0.2 but should work fine for fatter layer and/or a 0.8 nozzle.
I printed with 4 walls as it reduces print time as has less internal supports and more continuous moves.
For bed adhesion I advise external and internal brim ~5mm no other supports needed.
Do a temp tower to ensure you don't get too much stringing etc.

Lamp Shade.stl

Planetary Compartment Container

**Planetary Compartment Container**

This container has three separate compartments, turning the knob on top of the container indexes through the different compartments at a 4:1 ratio. This is done with the use of a planetary gear stage on the bottom of the container.  Turning the knob drives the sun gear which causes the carrier to spin which in this case is the inner dividing cylinder. The 4:1 ratio is a result of the planetary gears rotating quicker around the larger 32 tooth ring gear verses the smaller 12 tooth sun gear.  

The OAL's are 135mm tall by 94mm in diameter. I'm also working on a smaller diameter version that I'll be releasing shortly in a short and tall version. 

This container was derived from the [Mini Planetary Demo Unit]( https://social.thangs.com/m/50395) that I designed to learn more about planetary gears.  Check that one or the [Original Demo Unit]( https://social.thangs.com/m/47634) I made out,  it really helps to better understand how these gears work when you can hold it in your hand. You may find they are more complex than you thought. 

**Print instructions**
Prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  

Printed with 3D Fuel’s [Silver PLA]( https://www.3dfuel.com/products/standard-pla-filament-simply-silver-1-75mm))

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


brass knuckle

1/18 SEG Chitty Chitty Bang Bang Rear Steps

Sasuke 2D .stl

Sasuke   2D Frame
Sasuke  2D Quadro

Supports:
No

Resolution:
0.2

Infill:
10%

Notes:
Easy to print

Automotive lighting

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Michelangelo Teenage Mutant Ninja Turtles 2D-Art.3mf

Spring Latch Keychain

simple afc nfc ffl trophy

Porsche

Apple Watch Series 7

Planetary Egg Container

adapter s9 to 150mm fan

Speaker HIFI *(Work in progress!)

Modern Planter 001

Diatone Q33 insta360 GO minimal camera mount

Tentaku Plate v1.stl

Voronoi Lamp Shade open

Planetary Compartment Container

brass knuckle

View 47 new models

Sasuke 2D .stl

View 21 new models

Heart on valentine's day

Lamp Shade

RC_-_Axial_SCX24_JLU_roof_rack_Remix.stl