Ghostbusters Ecto Goggles

googles_body.stl

bioshock fidget

upper_magnet_carrier.SLDPRT

spacer.SLDPRT

base.SLDPRT

big10

big10.stl

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Rick and Morty plates and logo for Light and Shadow Box

Plate 1.stl

Haunted Baseball Stadium

stadiumGroundFloor.stl

Unknown in Red


**Print Instructions**
- Once sliced, the background will disappear.
- Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
- PLA PolyTerra Charcoal Black Transmission Distance: 0.3
- PLA BambuLab Tough Vermilion Red Transmission Distance: 3
- PLA PolyTerra Army Red Transmission Distance: 0.3
- PLA White Transmission Distance: 6

Swap Instructions:
- Start with Charcoal Black
- At layer #12 (0.6mm) swap to Vermilion Red
- At layer #22 (1mm) swap to Army Red
- At layer #34 (1.48mm) swap to White for the rest

SPACEBALLS - THE DOOR STOP

PAC-MAN Ghosts keychain collection

PAC-MAN_Ghost_Blinky.stl

Slingshot Usopp One Piece

slingshot

Bookend Oval Minimalist

Bookend Minimalist.step

gopro extension (stand-off)

I had some 12mm(OD) 10mm(ID) carbon tubes laying around. so I made a gopro Stand-off Mount.

you can either have one short straight or with the kinked adapter have a longer, kinked mount.

Batman Forever, 1995 logo

"Batman Forever," released in 1995, marked a significant turning point in the Batman film franchise. 

Directed by Joel Schumacher, this installment saw Val Kilmer taking on the role of the Dark Knight, previously portrayed by Michael Keaton. The film introduced a more colorful and campy tone, departing from the darker atmosphere of Tim Burton's previous Batman films. 

"Batman Forever" featured iconic villains Two-Face (played by Tommy Lee Jones) and the Riddler (portrayed by Jim Carrey), as well as the introduction of Robin (Chris O'Donnell) to the franchise. While it received mixed reviews, the film was a commercial success and contributed to the evolution of the Batman film series throughout the 1990s and early 2000s.

This Batman logo has been designed to allow for consecutive color changes when printing. It is a quick and straightforward print and has a manageable size to fit well in various locations. It can be easily adhered to flat surfaces using double-sided tape or putty. 

As general settings, we have used a 0.4 mm nozzle, a layer height of 0.25 mm, and the color sequence is: black - yellow (at 4.25 mm) - black (at 5.50 mm).

*****************************************

All Quimicafeina designs are protected by Copyright Law. By downloading, you have no right to sell or share any digital files or reproductions from those files.

To get access to all of our designs or for a commercial license to sell the physical prints of the files, you can support us on patreon. Link in the bio.

Grim Doomscizor

klirby pikachu complete

If you are a bambulab user, you can find the pre painted 3mf files [here](https://thangs.com/mythangs/file/946305)

this model is for personal use only, if you want to sell my designs please take a look at my patreon: https://www.patreon.com/pressprint

Lego Lightsaber Print-in-Place

**Collapsing Lego Lightsaber**
_ Print-in-Place Version_

This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version print complete all as one piece. 

The [Replaceable Blade Version](https://than.gs/m/944329) is available to my Thangs members.

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld


Amarillo Slim - Sucker.stl

"Look around the table, If you don't see a sucker, get up, because you're the sucker." Poker quote from poker legend Amarillo Slim. Man cave art.

Arts & Entertainment

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 716 new models

bioshock fidget

upper_magnet_carrier.SLDPRT

spacer.SLDPRT

base.SLDPRT

View 15 new models

Jack Skellington Band Poster

View 10 new models

View 23 new models

Unknown in Red

SPACEBALLS - THE DOOR STOP

PAC-MAN Ghosts keychain collection

Slingshot Usopp One Piece

View 24 new models

gopro extension (stand-off)

Batman Forever, 1995 logo

Grim Doomscizor

klirby pikachu complete

Lego Lightsaber Print-in-Place

Amarillo Slim - Sucker.stl