Stormtroopers - Star Wars Rogue One - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA PolyLite Starlight Neptune Transmission Distance: 1
	PLA PolyLite Pro Light Blue Transmission Distance: 1
	PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
	Start with Dark Blue
	At layer #5 (0.48mm) swap to Starlight Neptune
	At layer #13 (1.12mm) swap to Light Blue
	At layer #15 (1.28mm) swap to White for the rest.


Stormtroopers

Sandworm Bust (Beetlejuice) -Little Big Head Series

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
Check out my whole "Little Big Head" series!
Including [Barbara](https://than.gs/m/926955) and [Adam](https://than.gs/m/928950)!!!

Sandworm (Beetlejuice) -Little Big Head Series

Gridfinity Nikon F Lens Stand

Gridfinity Nikon Lens Stand

Crying King Emote from Clash Royale

Baby Yoda Keyring

Baby Yoda Keyring

Better with colour change

Tripod Ground Spike

This is a tripod ground spike you can use to place a camera in the ground anywhere.  You'll need 1 brass insert for each spike 
https://amzn.to/3apQlAQ
and you'll also need a 1/4" adapter to your camera like https://amzn.to/394nvFL . 

Simply print the part, then use a soldering iron to SLOWLY insert the brass insert.  Allow to cool for at least 30 minutes.  Don't touch it at all while cooling. 

Once cool you can mount any camera, webcam or other device that uses a 1/4-20 thread.  

What do I use a tripod ground spike for?
- attach a trail cam, for ground level action
- attach a gopro and capture video of your golf swing, hitting the ball, etc.
- Great for small cameras at kids baseball games, etc. 
- Hold the camera in the sand on the beach

These spikes will cost you around $20 on amazon but the 3D print at 100% infill is only 39g and very strong. 

lightsaber

a lightsaber that I designed for if I was in the star wars universe

Iron Man

Included in my collection of [Marvel Masks](https://thangs.com/mythangs/folder/9022)

ironman.stl

The Simpsons – Full 3D Printable Collection

Bart_Simpson_base.stl

Star Wars (Inspired) "Ana-pumpkin Skywalker" HueForge Darth Vader Helmet

As a young slave on the desert planet of Tatooine, Anakin discovered his fascination with pumpkins during a rare visit to the local market. He was captivated by their vivid color, unique shapes, and the joy they seemed to bring to the people. It was a simple pleasure in a life filled with hardship, and he often dreamt of cultivating his own pumpkin patch someday.

As Anakin honed his skills with podracing and his prowess with the Force, he never forgot his dream of becoming a pumpkin farmer. When he met Padmé Amidala and fell in love, he shared his dream with her. Padmé, touched by his sincerity, supported his desire to have a peaceful life as a farmer after their turbulent adventures.

However, the Sith Lord Darth Sidious sensed Anakin's attachment to the idea of pumpkin farming and skillfully used it to manipulate him. Sidious convinced Anakin that his dreams of a simple life were unattainable within the Jedi Order, pushing him further toward the dark side. In this quirky alternate universe, Anakin's love for pumpkins became a symbol of his attachment, ultimately contributing to his transformation into Darth Vader.

As Darth Vader, he became known throughout the galaxy for his fearsome prowess and iconic helmet, which some cheekily noted bore a resemblance to the top of a pumpkin. Yet, deep within the black armor and behind the respirator's mechanical breath, there remained a trace of Anakin's dream of cultivating pumpkins, a reminder of the simple life he had once longed for but could never attain.

Sliced at .08mm in Bambu Studio:

Black to Layer 6
Translucent Orange to Layer 10
Opaque Orange to Layer 17
Cream to Top Layer

whiket.stl

30 mm Castor Wheels Adapter for Neewer Studio Light Tripods

I have designed an adapter, which allows you to attach 30 mm Caster Wheels to your Neewer Studio Light Tripods (approx. 20 mm diameter of tripod legs)

**Bill of Materials**
- 30 mm Caster Wheels (with 30 mm Plate)
- M3 Screws (8 mm & 10 mm)
- M3 Hex Nutzs

**Print Settings**

- Filament: 
- Print Temp: 215°C First Layer / 210°C 2nd Layer onward
- Bed Temp: 60°C 
- Perimeters: 3
- Infill: 25%

I am printing with a Creality CR-6 SE, which has a 0.6mm Nozzle

Check out my YouTube Video for more details:
https://youtube.com/shorts/TZYh4HITcCE

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

30 mm Caster Wheels Adapter for Neewer Studio Light Tripods

Batman

batman.STL

Withered Bonnie - FNAF - Fan Art

witheredbonnie.stl

MAJESTATIC DRAGON SCULPTURE / GOTHIC DECOR / SHELF SCULPTURE DECOR

MAJESTATIC DRAGON BIG.stl

MolBall Magnetic Fidget

MolBall Magnetic top.stl

Mandalorian Spear (Star Wars)

Mandalorian spear - part 12 Mandalorian Spear-1.STL

XXXG-01S-2 Gundam Nataku

XXXG-01S-2 Gundam Nataku - Ren.obj

Nightmare Worm

Creepy articulated print in place model.

"Nightmare Worm"

Inspired by the Nightmare on Elm Street film series.

Horrific model for fans of the creepy and weird.

Nightmare Worm - Limited Time Free Download

Flexi Ben Affleck’s Batman Logo

This 3D printable model is a Flexi Ben Affleck’s Batman Logo that has a flexible bat symbol. It’s a cool and fun accessory that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the Dark Knight.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is print-in-place and does not need any assembly. It has a bulky and powerful design that matches the logo of Ben Affleck’s Batman from Batman v Superman: Dawn of Justice and Justice League. This Flexi Ben Affleck’s Batman Logo is a great way to show your appreciation for the Caped Crusader and his cinematic adventures. Download it today and be the hero Gotham deserves!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Arts & Entertainment

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Stormtroopers - Star Wars Rogue One - HueForge

Sandworm Bust (Beetlejuice) -Little Big Head Series

Gridfinity Nikon F Lens Stand

Crying King Emote from Clash Royale

Baby Yoda Keyring

Tripod Ground Spike

lightsaber

Iron Man

The Simpsons – Full 3D Printable Collection

Star Wars (Inspired) "Ana-pumpkin Skywalker" HueForge Darth Vader Helmet

whiket.stl

30 mm Castor Wheels Adapter for Neewer Studio Light Tripods

Batman

Withered Bonnie - FNAF - Fan Art

MAJESTATIC DRAGON SCULPTURE / GOTHIC DECOR / SHELF SCULPTURE DECOR

MolBall Magnetic Fidget

Mandalorian Spear (Star Wars)

XXXG-01S-2 Gundam Nataku

Nightmare Worm

Flexi Ben Affleck’s Batman Logo