AMS Hygrometer Mount

Hygrometer AMS Mount v2.stl

Poke Ball Double Sided Ver.

Poke Ball Base.stl

Cherish Ball Double Sided Ver.

Cherish Ball Base.stl

Pumpkin Ball Double Sided Ver.

Pumpkin Ball Base.stl

Fidget Spinner of Destiny (AMS Ready)

Fidget Spinner of Destiny One Plate.3mf

AMS / MMU Mighty Mouse Hand Loop Keychain

AMS MMU Mighty Mouse Hand Loop Keychain.3mf

AMS / MMU Mighty Mouse Ear Loop Keychain

AMS MMU Mighty Mouse Ear Loop Keychain.3mf

Mithril Bear Knife Assembly Ver.

A cosplay replica for Yuna's weapon, as seen on the "Kuma Kuma Kuma Bear Punch" series. You can print the inidiviual parts in their final colors, plus dual color for the blade is an option!

The parts are oriented for the average print bed. If scaling, scale everything evenly.

Two dowel pins are included to line up everything before gluing together. If the dowels are too tight, either sand them or scale down equally on X and Y.

Test fitment of the parts, as you may want to sand some of the surfaces before applying adhesive. This can ensure a better bond. Always use PPE when handling harsh chemicals or strong adhesives.

Included are a pair of "bear face inlays". You can print these in a different color from the guard to make the Bear logo pop! Just add a small drop of glue in the center, that's all it should take. For a cleaner application, add a drop of glue to the tip of a toothpick and use as an applicator.

Depending on the settings of your printer, the handle should press fit into the guard piece. worst case, it might need a little sanding and a small drop of glue. Same with the pommel. 

You can print the blade in two separate halves or print it in one piece. Both options can be printed in dual color like the original. Dual color will require an AMS/MMU system or SEVERAL manual filament swaps.

For the full blade there is an included "blade color swap modifier". I added this so it would be easier print the spine of the blade in the same color as the face. Updates to the slicers could make this step unnecesary in the future, but here's how to use it if necessary:

- Load "blade color swap modifier" and "blade full" together into the slicer. (hold CTRL key when choosing both)
- When asked "Load these files as a single object with multiple parts?" click YES.
- Change the color of the color modifier STL to the secondary color of choice.
- Right click the color modifier STL, click on "change type" and choose "modifier".
- Slice and check the layers are changing colors as desired.

Full Knife.stl

YASS SPLITTER

Just a mash up of designs to make my own AMS Y splitter. This will fit the P1P, X1C, P1S, and X one E from bamboo labs... You just need two M10 PTFE fittings

Started with this https://makerworld.com/en/models/43773#profileId-45038

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

Pumpkin Skull 2.0

Pumpkin Skull 2.0_Full.stl

Pumpkin Skull 2.0 (Hollowed)

Pumpkin Skull 2.0 (Hollowed)_Full.stl

 Cat on a Pumpkin (Halloween Version) 

Full (Halloween).stl

PAC-MAN AMS Version

Pre-Painted for BAMBU AMS
Feed your retro gamer Pac-Man Mini!  

Pumpkin PAC-MAN - BAMBU AMS

PAC-MAN-Pumpkin_AMS_v2.3mf

Skull with brain Colored

Enjoy the creepy skull with brain in a colored .3mf!

Print the two halves and glue together


No supports required

Cat on a Pumpkin

Full.stl

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre=Painted 3MF of all Snap-Flex joint tolerances**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.
Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. 

**Recommended Types of FIlament:**
I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (All Tolerances)

AMS / MMU Toronto FC coaster or plaque

AMS Toronto FC coaster.3mf

AMS

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

AMS Hygrometer Mount

Poke Ball Double Sided Ver.

Cherish Ball Double Sided Ver.

Pumpkin Ball Double Sided Ver.

Fidget Spinner of Destiny (AMS Ready)

AMS / MMU Mighty Mouse Hand Loop Keychain

AMS / MMU Mighty Mouse Ear Loop Keychain

Mithril Bear Knife Assembly Ver.

YASS SPLITTER

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

Pumpkin Skull 2.0

Pumpkin Skull 2.0 (Hollowed)

Cat on a Pumpkin (Halloween Version)

PAC-MAN AMS Version

Pumpkin PAC-MAN - BAMBU AMS

View 13 new models

Cat on a Pumpkin

Witch Hat Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

View 61 new models