**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Professional quality:
High-resolution STL designed for clean slicing, sharp details, and excellent print results. Compatible with both FDM and resin printers.
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20 (draft)

Nozzle: 0.4  for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

D256.stl

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

Useful Resources for Local 3D Printing Sellers

If you run a local business and need simple 3D models (figures, keychains, cutters, multilayer designs, etc.) to print and resell physically, I’ve enabled a subscription option on Thangs where you can download up to 30 files per month, choosing freely from the entire catalog.
Rollover system — your unused downloads stack up 🔄

It’s designed for makers who need a steady variety of designs without purchasing each file individually every time.

⚠️** Limited slots**
This plan is designed for creators who need a constant flow of ready-to-print STL models for physical resale.
If the slot shows as available, it means there is still space. If it becomes full, you will need to wait for the next opening period.

Designed for 220x220 mm beds — feel free to resize the model as needed.

Below are the printing settings I personally use.
These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20% (draft)

Nozzle: 0.4 mm for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

Christmas Bird Ornament STL

D728.stl

 Merry Christmas Text Ornament STL

D719.stl

Snowman with Hat STL

D718.stl

Reindeer Holiday Ornament STL

D703.stl

Christmas Cat with Gift STL

D693.stl

Cuadro de Cebra – Zebra Wall Art STL – Safari Relief 3D Print D251

D251.stl

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**


_Twisting waves of passion move beneath your calm, organized exterior.  The Hestra is for you_
 
The Hestra (Hess-truh) Table Lamp brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the six underlying waves evoke a more dynamic sense of motion.

_Why hide who you are?  Let your passion shine through_



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**


**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
The lamp shad prints in Vase Mode/Spiralize/Spiral Vase Mode
The Base and cap print regularly without supports.  
**The base should be printed upside down**
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Hestra Table Lamp - Vase Mode STL and Bambu 3MF

The Hestra - Vase Mode Pendant Light Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  
 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**

_You cut a striking figure where the light and shadow meet.  To observe from just one angle leaves the picture incomplete_  

_The Trysta is for you_

The Trysta (Tris-tuh) Table Lamp graces each room with modern elegance.
 
The clean, ribbed design complements a wide range of aesthetics, while the vertical pattern both hides and accentuates the curves that lie within.

_What's holding you back?  Rendezvous with destiny_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf files optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode for the Lamp Shade
Regular printing for the Base and Cap
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Trysta Table Lamp - STL and Bambu 3MF

The Trysta - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_The sides of you others can't see convey a hint of mystery.  The Scura calls to you_
 
The Scura (Skyur-Uh) Pendant Light brings a modern vibe with a subtle twist

The clean design complements a wide range of aesthetics, while the broad, curved fins add a more dynamic sense of depth to the room.



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Scura represents the fourth design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Scura - Pendant Light, Vase Mode Bambu 3MF

The Scura - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Stria (Stry-uh) Pendant Light adds a touch of modern elegance to any room.
 
The clean, ribbed design complements a wide range of aesthetics.

You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.
 
This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Stria represents the first design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

For some spookier decor check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

**Safety First**
Intended for use with **9 watt LED Lights**.  Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers. 

100% Scale
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Stria - Pendant Light, Vase Mode 

Stria_PendantLamp_VaseMode_Bambu.3mf

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Professional quality:
High-resolution STL designed for clean slicing, sharp details, and excellent print results. Compatible with both FDM and resin printers.
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20 (draft)

Nozzle: 0.4  for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.


3MF

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

Hestra Table Lamp - Vase Mode STL and Bambu 3MF

Florero Decorativo – Decorative Flower Vase STL