Mini Print-in-Place Vise

**Print-in-Place Mini Vice**
This mini vise prints vertically as one piece using no supports. There are small pads on the moving jaws that reduce the clearance required in order to print it in place.  The risers under the vise allow the handwheel to be turned while sitting on a flat surface. The knob on the hand wheel should swivel as well.  The jaws are 64mm wide and  open to 80mm.  It has an overall printing height of 164mm.

**Print Instructions**
The moving jaws form on top of the serrations of the stationary jaw and as a result it’s important that you use a .4mm nozzle x .45mm line width, and .2mm layer heights if printing at 100%.  To free the jaws after printing I pried slightly with a screw driver on each side of the jaws before opening it with the screw.

The hardest thing about this print is probably the overhangs and bridging as a result of the weight saver holes.  If these hole are causing people issues I can make a version without them but I think most printers have adequate cooling to handle it. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.

Printed with [3D Fuel Silver PLA]( https://www.3dfuel.com/collections/175ppla)


Print-in-Place Mini Vice

Flying Serpent 2025

Cinderwing3D Flying Serpent 2025.stl

Steampunk Light Switch

SWITCH ASSEMBLY.stl

Hand Crossbow 3D-print

Hand Crossbow 3d-print ready
For pellets or bullets diameter 7-7,5mm

8x8 MU - Bottom Grid Interfitted - MultiBoard Octagon Plate

8x8 Bottom Edge - Multiboard Border Tile.stl

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

AMS Stand 10mm rod - decorated left.stl

Gridfinity Toolbox (Parametric)

Plate.stl

Mario and Yoshi - Super Mario Bros - Fan Art

Mario and Yoshi - Super Mario Bros - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Dress Up Porch Goose for Goose Gear

PorchGoose4Color3MF_FunFam3D.3mf

Cubone - Pokemon - Fan Art

Tiny Rose Dragon and Wyvern 2025 Edition

Cinderwing3D Tiny Rose Dragon Colors.3mf

Frames - Cargo Connect

Ready to Print - Frames - Easy Access.3mf

Small Thread - Raised Fix Point

2.6 mm Offset - Small Thread - Multipoint.stl

Shenron - Dragon Ball Z - Wall Decoration 

Shenron - full.stl

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

Gridfinity Dense 1x1 Full SD & Micro SD Storage

Vampire Skull - Decoration

Vampire Skull - Decoration
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Darth Vader Pen and Phone Holder

Darth Vader Pen and Phone Stand.stl

Togepi - Pokemon - Fan Art

Togepi - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

7x7 Multiboard Corner Legacy Tile

7x7 Multiboard Corner Tile.stl

TCG Munkey Card Scanner With Phone Tower

Card Scanner1.stl

3

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini Print-in-Place Vise

Flying Serpent 2025

Steampunk Light Switch

Hand Crossbow 3D-print

8x8 MU - Bottom Grid Interfitted - MultiBoard Octagon Plate

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

Gridfinity Toolbox (Parametric)

Mario and Yoshi - Super Mario Bros - Fan Art

Dress Up Porch Goose for Goose Gear

Cubone - Pokemon - Fan Art

Tiny Rose Dragon and Wyvern 2025 Edition

Frames - Cargo Connect

Small Thread - Raised Fix Point

Shenron - Dragon Ball Z - Wall Decoration

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

Vampire Skull - Decoration

Darth Vader Pen and Phone Holder

Togepi - Pokemon - Fan Art

7x7 Multiboard Corner Legacy Tile

TCG Munkey Card Scanner With Phone Tower