Hex Bin Gridfinity 2x2

HexTray_Gridfinity_2x2_Stackable.stl

MultiBoard Gridfinity Shelf 2x2

MultiBoard_GridfinityShelf_2x2.stl

Gridfinity Divider Box 2x2x6 1-Compartment with Label

I needed a 2x2 square box with a label, so I made one with bakerboy's [Gridfinity Parametric Boxes](https://github.com/bakerboy908/Gridfinity_Parametric_Boxes).

Divider Box 2x2x6 1-Compartment with Label

Tsugite Cube 2x2 Puzzle

a.stl

Giant Milwaukee Packout Bin

PackoutBin_2x2x1.stl

Gridfinity SD USB Holder 2x2

Gridfinity SD USB Holder.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Gridfinity Exacto Knife and blades holder - 250 Pcs  2x2x49mm 

This is a 2x2 gridfinity holder for a the DIYSELF 250 Pcs Exacto Knife set on Amazon. Holds the Ruler, up to 3 Exacto knives, box cutter and 180 spare blades in the cases they come in.

Gridfinity_2x2_49mm_250 Pcs Exacto Knife and blades holder.stl

Polypanels // Triangle Mesh Fabric

triangle-fabric.stl

Polypanels // 2x2x2 Triangle

doubletriangle-open.stl

Tsugite Cube 2x2 Puzzle // Hypercube

tiny_A.stl

Oral B toothbrush charger gridfinity.3mf

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

Tsugite 2x2 Hollow Cube

A.stl

Segmented tray with sloped edges (many configurations 2x2, 4x4, etc) 

segmented-tray-v1-h20-50x50-3x3-154x154mm.stl

Tsugite 2x2 Hollow Ball

45mm x45mm x 29.5mm Table Foot Extension

In order to raise a table to the height of a workbench, I created this simple item to slide over the ends of the table legs.  It raises the table up 29.5mm

45mm x45mm Table Foot Extension

2x2

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hex Bin Gridfinity 2x2

MultiBoard Gridfinity Shelf 2x2

Gridfinity Divider Box 2x2x6 1-Compartment with Label

Tsugite Cube 2x2 Puzzle

Giant Milwaukee Packout Bin

Gridfinity SD USB Holder 2x2

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

Gridfinity Exacto Knife and blades holder - 250 Pcs 2x2x49mm

Polypanels // Triangle Mesh Fabric

Polypanels // 2x2x2 Triangle

Tsugite Cube 2x2 Puzzle // Hypercube

Oral B toothbrush charger gridfinity.3mf

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

Tsugite 2x2 Hollow Cube

Segmented tray with sloped edges (many configurations 2x2, 4x4, etc)

Tsugite 2x2 Hollow Ball

45mm x45mm x 29.5mm Table Foot Extension