"Stitches" the Articulated Teddy Bear

Peter Prints - Stitches the Bear Final Multicolor A1 mini.3mf

Heat Set Insert - Weight Bearing Snap - M2 Standard

Heat Set Insert - Weight Bearing Snap - M2 Standard.stl

Skull Dragon Print in Place

This spiky, scaly boi is perfect for anyone who's a fan of mythical beasts, or who just wants to spruce up their desk with a little 3D-printed magic. And because it's a print in place design, you won't need to do any assembly - this dragon comes ready to roar right out of your printer!

Knurled Nightcrawler

This “Knurled Nightcrawler” is part of a series of three textured articulating snakes.

See here for video: https://youtu.be/8fIhzqsQP_k 

These textured articulating snakes use a unique print-in-place ovoid joint to create realistic snake movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

The snakes are 54sm in length but will print easily on a 200mm x 200mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

These models demonstrate some of the surfacing and texturing capabilities of nTopology.


BMO Nintendo Switch Stand

About
A BMO Nintendo Switch Stand.

I've also include a body without the switch stand if you just want to make a BMO model.

These parts are provided free of charge under Creative Commons - Attribution - Non-Commercial - Share Alike license. This comes with out any warranty, guarantees, or liability for the files or parts produced with them. You are responsibly for assessing the strength and appropriate application of any parts produced with these files.

Parts to Print
There are a few different options for different printers with different capabilities. Theres also some remixes that may make it easier.

The printed parts you will need are:

Set of arms and legs
Back
Body
Body One Piece
or
Split Body Face (can be printed with buttons separately)
Split Body Butt (can be printed in another 2 parts with the Butt_S models)
This thing is huge, it will take ~1 roll of plastic to print. I printed with .4 layers, 25% infill, and 3 walls. . Because the print is so large, Id also recommend an enclosure. I've included one stl with corner hold downs since mine kept warping off the build plate.

The body contains a large bridge if you chose to print it without support. I suspect that some printers may not be able to do this (you can try this test). Cura seems to want to print it in mid air if you don't mess with the bottom layer directions, I had to set my "top/bottom layer directions" to [ 90, 0], this may depend on other settings so double check that its not printing in mid air. If your printer cant do this bridge I recommend printing the two BMO_Body_Split_Butt_S_Screen_Removed models.

Assembly
Non-printed Parts:

4x M5x0.8 counter sunk screws (max 80mm long)
140mm x 80mm picture of BMOs face
Extra Nintendo Switch charging cable if you chose to glue one in. Or a dock like this for hdmi.
Sand and paint all the parts before gluing on parts..

The back is held on with the M5 counter sunk screws.

You can put a picture of BMO's face in behind where the switch goes so you'll see that when the switch isn't in the dock.

You can also hot glue in a charging cable. Id recommend tying a knot inside so it cant be pulled out.

if you printed the face separately glue that on.

I tried to find some thing to make the arms articulable but haven't found a good part yet. Maybe something like "Flexi Ties" but smaller, suggestions welcome.

Changelog
12/31/20: I realized that some of the parts are much larger than they needed to be so to cut down on plastic ive made the walls substantially smaller on the body. Ive also removed the parts without screens since they don't seem to really be useful. Renders have been updated. All parts with the body have been updated.

1/8/21: Fully Printed and tested. I didn't like how tight the fit for the switch is so I added .15mm in the gap.

Design Files
Fusion 360 Files can be found here: a360.co/3007U21
Issued under the same license and terms.

Donate
I'm a grad student at the moment just doing this for fun and sharing what I make. If you support my addiction to making things you can donate via paypal or venmo. I do not plan to charge for the models I make since I love the opensource community and think models should be shared openly. Thank you for your appreciation of my BMO model!


paypal


venmo



I have seen similar models for upwards of $20, if you were considering paying for those please instead consider sending some money to any of the following charities:

https://ablegamers.org/
https://www.aclu.org/
https://www.gamesaid.org/
https://www.eff.org/

BMO Switch Stand v16.step

Reptar

Fanart of Reptar from Rugrats! Check out the video here!
https://www.youtube.com/watch?v=ksjo8uYzGgk

Tiger Warrior Controller Stands

Orange_Hand.3mf

Chibi Owlbear Cub - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Owlbear Cub.stl

Tree bark planter “Fraxinus Excelsior”

pot_small.stl

Tyranitar Controller Holder - Multipart

COMPLETE Tyranitar controller holdeer.stl

Charles Planter

Charles Planter Pot.stl

Bitcoin

Bitcoin.STEP

thors_hammer.stl

Hydroponics Modular Tower

Hydroponics Module.stl

2x2 Multiboard Corner Legacy Tile - x4 Multi-Material Stack

2x2 Multiboard Corner Tile - x4 Multi-Material Stack.stl

4x4x0.25 CU - Simple Walls - Multibin Shell

4x4x0.25, No Lock Holes, Multigrid Bin.stl

4040_Mount.stl

This is a building block for creating objects that mount to a 4040 Aluminum Extrusion. I use this to create attachments to the base of an Ender 3 type of printer.



Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

"Stitches" the Articulated Teddy Bear

Heat Set Insert - Weight Bearing Snap - M2 Standard

Skull Dragon Print in Place

Knurled Nightcrawler

BMO Nintendo Switch Stand

Reptar

Tiger Warrior Controller Stands

Chibi Owlbear Cub - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Tree bark planter “Fraxinus Excelsior”

Tyranitar Controller Holder - Multipart

Charles Planter

Bitcoin

thors_hammer.stl

Hydroponics Modular Tower

2x2 Multiboard Corner Legacy Tile - x4 Multi-Material Stack

4x4x0.25 CU - Simple Walls - Multibin Shell

4040_Mount.stl

Gourd Games

1 LU Bin Fit - II Cover Locked Lite Rail - (2 MU Rail)

Oddish Pot (No Supports) - Pokémon Planter by RNDM3D



Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

"Stitches" the Articulated Teddy Bear

Heat Set Insert - Weight Bearing Snap - M2 Standard

Skull Dragon Print in Place

Knurled Nightcrawler

BMO Nintendo Switch Stand

Reptar

Tiger Warrior Controller Stands

Chibi Owlbear Cub - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Tree bark planter “Fraxinus Excelsior”

Tyranitar Controller Holder - Multipart

Charles Planter

Bitcoin

thors_hammer.stl

Hydroponics Modular Tower

2x2 Multiboard Corner Legacy Tile - x4 Multi-Material Stack

4x4x0.25 CU - Simple Walls - Multibin Shell

4040_Mount.stl

Gourd Games

1 LU Bin Fit - II Cover Locked Lite Rail - (2 MU Rail)

Oddish Pot (No Supports) - Pokémon Planter *by RNDM3D*

Oddish Pot (No Supports) - Pokémon Planter by RNDM3D