Rudolph (Island of Misfit Toys)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***
_I will be sculpting more characters from this classic for our Patrons this month!_

If you would like to support us and receive exclusive to Patron models every month check us out here:
[https://www.patreon.com/chaoscoretech](url)

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

#christmas #rudolph #decorations #xmas 

Rudolph.stl

Spray Paint Cap Adapter - Rustoleum to Montana Tip!

This part is a Spray Paint Can Cap Adapter. It allows you to use a Male Cap Nozzle on a Rustoleum can which has a Male Tip. Various "aftermarket" tips have various flow rates, fan spreads, and other characteristics someone may want when spraying paint. This allows you to use that wide variety of "aftermarket" tips on a standard Rustoleum paint can. As well as having Wings on the part for finger options when spraying and aid installing/removing the adapter.

Remove the stock Rustoleum Cap, Install the New Cap onto your Adapter, then Assemble the Adapter/Cap onto the Rustoleum Can.

This is a VERY tight fit to the can tip and the new Cap. It is meant to be this way so that the seal and fit is good. It does require a strong push together to assemble. Wings can aid in removal.


- PRINT PARAMETERS:
    - Recommend printing with the "Top" smaller end on the build plate.  Supports required. 
    - .16mm Layer Height
    - 100% Infill Ratio


---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.HotRodHippie.com/links

Tiny Cookie - Star Cookie

CW3D Star Cookie Tiny Spider.stl

7x7 MU - Top Grid Interfitted - MultiBoard Octagon Plate

7x7 Top Edge - Multiboard Border Tile.stl

Circle Planter with Hidden Drainage

Circle.stl

Cracked Skull

Skull.stl

Gizmo_Reaching -Secrets of the Mogwai

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
 
**Sculpt by @ChelsC423**
Gizmo fanart sculpt, inspired by the new Secrets of the Mogwai.

Gizmo_Reaching -Secrets of the Mogai

Torus Vase

Torus Vase.STEP

4x4 MU - Bottom Right Grid Interfitted - MultiBoard Octagon Plate

4x4 Bottom Right Corner - Multiboard Border Tile.stl

20 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt

20 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt.stl

Howling Wolf

Full.stl

9 mm Big Thread, Plain Head, T-Bolt

9 mm Big Thread, Plain Head, T-Bolt.stl

20 mm Big Thread, Flat Head, T-Bolt

20 mm Big Thread, Flat Head, T-Bolt.stl

Geralt Of Rivia Bust - The Witcher (Pre-Supported)

bust.stl

Hero Me Gen7 Release 4 ZIP

**This STL is an example of a completed Hero Me Gen7 printhead mounted to the X carriage of a 3D printer.**

Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: **[MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)**

The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. 

But If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs. 

by becoming a member you will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Hero Me Gen7 Example Model 1.stl

Tiny Pumpkin Octopus

Cinderwing3D Tiny Pumpkin Octopus.stl

SpiKey - The Cactus Wall Mounted Keyholder

Pot.stl

Collapsing Zanpakuto

ICHIGO-MULTI-WRAP.stl

SKEWBITS // 004 (v1 OUTDATED)

This is problem 004 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 004

Iron Man Helmet.STEP

财

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rudolph (Island of Misfit Toys)

Spray Paint Cap Adapter - Rustoleum to Montana Tip!

Tiny Cookie - Star Cookie

7x7 MU - Top Grid Interfitted - MultiBoard Octagon Plate

Circle Planter with Hidden Drainage

Cracked Skull

Gizmo_Reaching -Secrets of the Mogwai

Torus Vase

4x4 MU - Bottom Right Grid Interfitted - MultiBoard Octagon Plate

20 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt

Howling Wolf

9 mm Big Thread, Plain Head, T-Bolt

20 mm Big Thread, Flat Head, T-Bolt

Geralt Of Rivia Bust - The Witcher (Pre-Supported)

Hero Me Gen7 Release 4 ZIP

Tiny Pumpkin Octopus

SpiKey - The Cactus Wall Mounted Keyholder

Collapsing Zanpakuto

SKEWBITS // 004 (v1 OUTDATED)

Iron Man Helmet.STEP