12.5 mm - Quad Offset Snaps (DS Part A)

12.5 mm - Quad Offset Snaps (DS Part A) - Part 1.stl

Lucario - Pokemon - Fan Art

1989 Batmobile - FREE Batman Kit | No Supports, No AMS, No Glue

Plate 3 - Black.STL

6.25 mm - Quad Bolt-Lock - ScrewOn Mount

6.25 mm - Quad Bolt-Lock - ScrewOn Mount - Part 1.stl

Samurai - Incense Holder

Samurai-body.stl

Snorelax - Pokemon - Fan Art

WallPlate replacements

Original Plates_A10.stl

Bone Dragon - Articulated dragon

Dragon_Reduced_Poly.stl

Gear Fidget Spinner Print in Place

Gear Fidget Spinner.3mf

Alicorn Dragon

Cinderwing3D Alicorn Dragon Winged Colors.3mf

Onix (Pokemon)- Print In Place Flexi

Onyx_curved.stl

Fidget Herringbone Gears

A simple yet addictive Gear Fidget Toy. If you would like to see how this was designed you can see it here as part of a 10-minute design challenge: https://youtu.be/rcmXukGJqeg

Gear Fidget.stl

Planetary Egg Container

**Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)



Espeon - Pokemon - Fan Art

Espeon

Banana Duck / 3MF Included

Banana Duck v2.stl

Ditto (Easy Print No Supports)

Ditto02.stl

MCM Vase

The second in a series of vases! This one with a more mid century form.

No supports needed. Easy print. Can be scaled up or down however you like.

✊

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

12.5 mm - Quad Offset Snaps (DS Part A)

Lucario - Pokemon - Fan Art

1989 Batmobile - FREE Batman Kit | No Supports, No AMS, No Glue

6.25 mm - Quad Bolt-Lock - ScrewOn Mount

Samurai - Incense Holder

Snorelax - Pokemon - Fan Art

WallPlate replacements

Bone Dragon - Articulated dragon

Gear Fidget Spinner Print in Place

Alicorn Dragon

Onix (Pokemon)- Print In Place Flexi

Fidget Herringbone Gears

Planetary Egg Container

Espeon - Pokemon - Fan Art

Banana Duck / 3MF Included

Ditto (Easy Print No Supports)

MCM Vase

Flexi Baby Dino Brachiosaurus

Glaceon - Pokemon - Fan Art

Hextraction Secret Tiles