Sammy, the Ice Pint Holding Sloth

99_PintPal_Sloth_noDrawer_multicolor.3mf

Aston Martin VULCAN

The CatPart model has been converted to obj format so that it can be printed on a 3d printer. You can use the Catia software to preview the car in color. Run the .obj format to print from a 3D Printer.
Design Reference: https://grabcad.com/library/aston-martin-vulcan-1
Santa:
https://thangs.com/mythangs/file/37166
Christmas Minion:
https://thangs.com/mythangs/file/37168
Santa Hat:
https://thangs.com/mythangs/file/37164
Christmas Ornament:
https://thangs.com/mythangs/file/37167

Check out other designs here: https://thangs.com/haktanyagmur
M4Carbine:https://thangs.com/haktanyagmur/M4-Carbine-32489
Glock 17: https://thangs.com/haktanyagmur/Glock-17-32483
Batman Helmet: https://thangs.com/haktanyagmur/Batman-Helmet-22356
Iron Man Helmet: https://thangs.com/haktanyagmur/IronMAN-Helmet-22352
Turbo Jet Engine: https://thangs.com/haktanyagmur/TURBOJET-ENGINE-21555
P250 9mm Gun: https://thangs.com/haktanyagmur/P250-9mm-Airsoft-Toy-Printable-28408
Captain America Shield: https://thangs.com/haktanyagmur/Captain-America-Shield-printable-19774
Thor Hammer: https://thangs.com/haktanyagmur/Thor-Mijolnir-Hammer-24163
Thor Stormbreaker: https://thangs.com/haktanyagmur/Stormbreaker--24885
Batman Batpod: https://thangs.com/haktanyagmur/Batman-BatPod-24891
Darth Vader Helmet: https://thangs.com/haktanyagmur/Darth-Vader-Helmet-17220
Wall-E: https://thangs.com/haktanyagmur/WALLE-19346

Female Villager - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers

Female_Villager_NPC.stl

Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre-Painted 3MF of all Snap-Flex joint tolerances**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.


**Other Models:**

If you like Snappy Cat, be sure to check out the latest spooky articulated model here:
**Tight Tolerance Franken-Spine:**
https://than.gs/m/956746
**Medium Tolerance Franken-Spine:**
https://than.gs/m/956751
**Loose Tolerance Franken-Spine:**
https://than.gs/m/956752


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Gridfinity - Hex Driver Bits

Gridfinity (https://www.youtube.com/watch?v=ra_9zU-mnl8) 2x1 holder for hex driver bits.

Gridfinity - Hex Driver Bits.stl

Bounding Bunny - Articulated Fidget Bunny - Ludo Flexy

Bounding Bunny.stl

2 Deck Playing Card Case Type 2

2 Deck Playing Card Case Type 2 Base V2.STEP

Mickey Mouse Pumpkin Bowl/Lid (+Bambu 3mf Files)

MickeyPumpkin_Bowl.stl

Twist Lock Container Small Size

Twist Lock Container 70x70 Base_STL.stl

Saturn Desk Lamp

Greetings!

I'm excited to present you with my Saturn Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, i designed this lamp specifically for this lamp socked ton ebay. You can make your own version, it just involves more effort because the parts might not fit.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Saturn: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Saturn part, you'll need to print the holder with supports.

Voila! Your Saturn Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Saturn Desk Lamp!

Judge Dredd (fan art)

Wolverine Claws

M6 Bolt for Dial Indicator

This M6 shoulder bolt and M6 nut are used to hold the dial indicator to my dial indicator mount.

/

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Sammy, the Ice Pint Holding Sloth

Aston Martin VULCAN

Female Villager - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

Gridfinity - Hex Driver Bits

Bounding Bunny - Articulated Fidget Bunny - Ludo Flexy

2 Deck Playing Card Case Type 2

Mickey Mouse Pumpkin Bowl/Lid (+Bambu 3mf Files)

Twist Lock Container Small Size

Saturn Desk Lamp

Judge Dredd (fan art)

Wolverine Claws

M6 Bolt for Dial Indicator

M3D - Fantastic Animal Transport 2.0

Stackable Storage BOX

Hinged Box Test Print.stl

The Chick Free!

Minimalistic Phone stand.stp

Christmas Nativity

Articulated Octopus Chef