Minimalist Reindeer, Seasonal Christmas Decoration

Reindeer.stl

Rowlet Phone/Switch Holder - Pokemon

Rowlet Phone Holder-Body.stl

Frappe Gnome Container

MochaGnome1Color3MF_FunFam3D.3mf

-Free- Ghost catch all Dish

ghost_catchall_combined.stl

Bambu Lab Y-Splitter (5x5 magnets)

**Description**

This model allows all Bambu Lab X1/X1-Carbon users to use both the AMS and the external spool without having to disconnect/reconnect the PTFE tubes every time you want to switch. When designing this model I wanted to accomplish the below 3 goals:

- **Follow the filament's natural path for both AMS and external spool.** The filament path in all available Y-Splitter designs is optimal only for the AMS. For the external spool, however, the splitter usually turns in an up direction, which can cause the filament to get snag when inserting it.

- **Relieve the strain on the toolhead PTFE Tube.** This was achieved by adding a support section accommodating 3 neodymium magnets (5mm x 5mm). The Y-Splitter snaps nicely in place on the back cover of the printer.

- **Remove the stock coupling. ** I wanted to reduce the weight and length of the whole setup. Since this model has pneumatic connectors on all 3 entries, the stock one isn't really required.

I have been using this Y-Splitter for over a week and can confirm it works beautifully. The AMS colour changes work effortlessly, and I am able to start a print with the external spool in a matter of seconds.

**Print Settings**
- Material: PETG (optimal) - PLA (best)
- Layer height: 0.08mm (optimal) - 0.12mm (best)
- Walls: 4 (highly recommended)
- Infill: 25%
- Infill pattern: Grid
- Enable Support: YES
- Support Type: Tree (auto)
- Support Top Z distance: 0.45mm (this setting is to allow easy removal of the support)
- Support/object XY distance: 0.5mm (this setting is to allow easy removal of the support)
- Brim Type: Auto (highly recommended)

**Bill of Materials**
- 3 x PC4-M10 pneumatic connector 
- 3 x neodymium magnets 5mm x 5mm

**Important**
You need to adjust the toolhead PTFE tube to gain an additional 22mm so it sits flush inside the Y-Splitter. Alternatively, you can purchase a longer PTFE tube. If you decide to purchase a new one, ensure the ID is 2.5mm and the OD is 4mm.

I have moved the pneumatic stopper on the toolhead PTFE tube (the one sitting on the inside of the printer, next to the rubber sleeve where the PTFE tube exits the rear) and I can confirm that everything works perfectly fine. This option worked for me but may not for you so go print at your own risk. If you decide to go for this option, make sure the toolhead can reach the opposite corner and that the PTFE tube follows a natural path without any restrictions. 

**Disclaimer**
Avoid using any Carbon Fiber polymers (or any other abrasive options) to print this Y-Splitter since the roughness of the surface may cause the filament to get stuck on the inside path of the actual model.

Bambu Lab Y-Splitter (5x5 magnets) v2.1

Magnetic Tile Haunted House Collection: FLOORS

150x150 floor with center magnets.stl

Heartbeat Tea Set (Five Unique Teacups)

Heartbeat Teacup 1.stl

Paw Patrol Ryder Flexi.stl

Dragon Mug 01

TriDimen Studio_Dragon Mug.stl

Another Cupcake Jewelry Box - Vintage-Inspired Container and Gift Holder

pixelandpapier__cupcake2__cream.stl

skull storage box .stl

skull storage box 8mm mags.3mf

Inverted Gorilla Glue Stand (Gridfinity)

With a need to store and organize my partially used bottles of Gorilla superglue, I thought it a perfect opportunity to make a contribution to [ZackFreedman](https://thangs.com/designer/ZackFreedman)'s Gridfinity system.

This model is built on Zack's "Divider Box 2x1x2 1"  from his[ Gridfinity Divider Bins](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721).

Axolotl Chibi Keychain

Franken-Spine  - Articulated Snap-Flex Fidget (Tight Joints)

FrankenSpine_Tight_WithBody.stl

Corn on the Cob Fidget + Garden

Corn Leaves.stl

Quadrant – Coffee Table (No Hardware - No Support)

Upper Qaudrant (can be used as feet aswell) - Copy.stl

Easter Cats

Happy cat.stl

Dino Flex 3DTROOP.stl

Dino Flex for you to have fun!

For you and your kids play, it's very easy to print, doesn't need support, it's flexible and fun to play.

Make sure you print and support 3DTROOP!

Don't forget to like and follow us! Every week we will be posting new models for you to print!

Enjoy 3DTROOP!

Check out other of 3DTROOP models:

AUTOMATIC CAN HOLDER: https://cults3d.com/en/3d-model/gadget/automatic-can-holder

AUTOMATIC CAN HOLDER 470ML: https://cults3d.com/en/3d-model/gadget/automatic-can-holder-470ml

CHAMELEON FLEX: https://cults3d.com/en/3d-model/game/chameleon-flex

HAND FLEX: https://cults3d.com/en/3d-model/game/hand-flex

DINO TOOTHPASTE CAP: https://cults3d.com/en/3d-model/game/dino-toothpaste-cap

GPU DOUBLE EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-double-external-support

GPU SINGLE EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-single-external-support

GPU EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-external-support

LETTER ROBOT A: https://cults3d.com/en/3d-model/game/letter-robot-a

LETTER ROBOT E: https://cults3d.com/en/3d-model/game/letter-robot-e

3DTROOP BOT 01 - PRINT IN PLACE: https://cults3d.com/en/3d-model/game/3dtroop-bot-01-print-in-place

PHOTO BACKGROUND STAND: https://cults3d.com/en/3d-model/gadget/photo-background-stand

Swamp Mana Vase -(Magic The Gathering Inspired)

**Free downloads through August 21tst,
then they go to the Members Vault!**

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Phoenix bust (Pre-Supported)

phoenix.stl

$

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Minimalist Reindeer, Seasonal Christmas Decoration

Rowlet Phone/Switch Holder - Pokemon

Frappe Gnome Container

-Free- Ghost catch all Dish

Bambu Lab Y-Splitter (5x5 magnets)

Magnetic Tile Haunted House Collection: FLOORS

Heartbeat Tea Set (Five Unique Teacups)

Paw Patrol Ryder Flexi.stl

Dragon Mug 01

Another Cupcake Jewelry Box - Vintage-Inspired Container and Gift Holder

skull storage box .stl

Inverted Gorilla Glue Stand (Gridfinity)

Axolotl Chibi Keychain

Franken-Spine - Articulated Snap-Flex Fidget (Tight Joints)

Corn on the Cob Fidget + Garden

Quadrant – Coffee Table (No Hardware - No Support)

Easter Cats

Dino Flex 3DTROOP.stl

Swamp Mana Vase -(Magic The Gathering Inspired)

Phoenix bust (Pre-Supported)