Like many 3D printing hobbyists, I place one of my 3D printers on the LACK side table by IKEA. These risers will raise the table by 10 cm.

Note: A clearance of 1.5mm was included as I found the legs of LACK to have some irregularities.

I've also uploaded the standard (single leg) version and a tall version. Standard Version: https://thangs.com/model/45052 Tall Version: https://thangs.com/model/43849 Dual Version: https://thangs.com/model/43850

RECOMMENDED PRINT SETTINGS Brim or Raft: No Supports: No Orientation: Standing up Layer Height: 0.2mm Nozzle Size: 0.2mm Material: PLA or ABS

Learn Fusion 360: https://ProductDesignOnline.com

PDO YouTube: https://www.youtube.com/productdesignonline

3D Modeling Challenges: https://productdesignonline.com/challenge

This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/