Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5239636.

Was fed up of having to clear out the outside drain of rubbish and leaves. Don't know what happened to the original cover, but 3d printing to the rescue. 

Basic Drain Cover 178mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3249901.

Edit 17/6/2019: Noticed i screwed up the file on the speeds so I've updated to show the correct speed from 40 - 100mm/s in 5mm increments.

Edit 15/6/2019: As requested, I've updated the file to increase speeds 5mm/s every 5mm. Also included Fusion 360 file

Using Teaching Tech's design as a basis, I decided to create a model with text on the side to show the speeds from 40mm/s to 100mm/s

Updated the STL file and the Fusion 360 file as the text wasn't very clear after printing

Speed test

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3222468.

Here's my take on replacing the bed levelling knobs for the E10. Designed in Fusion 360. Sliced in Cura 3.5.1 Printed at 30mm/s

E10 Bed Levelling Knob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5025466.

As I am currently printing Merides Stargate Atlantis model, I thought it would be a good idea to have it raised up off my desk, as I am hoping to add lighting for the star drive section. Included is the STL file and also the Fusion 360 file, in case anyone wants to change it for their own needs. 

Note: I have NOT printed this out myself yet, so it might get updated once I do.

Stargate Atlantis Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027590.

Decided to do another base that will house a power socket and feed the cabling up through the mount and into the model. I'm also thinking about adding an Arduino Nano to control the lighting effects, so that will be housed in there also. Still haven't printed it yet, as i need more filament and a different colour to what I usually print with. 

Stargate Atlantis Base v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4980565.

A simple mount to prevent me from knocking over my bottles and glue. I'm just clumsy that way.

Update: Added the Fusion 360 step file without my logo for anyone that wants to add their own, or just wants a plain print

Glue & Paint stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3563193.

Supports are only needed from the build plate. Printed at 0.3 layer height at 70mm/s.

Lack Table Riser

A simple mount to prevent me from knocking over my bottles and glue. I'm just clumsy that way.

Glue_Paint stand.stl

Body1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

podmore71

Achievements

Seedling

Explorer