AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments used in example: Polymaker Charcoal Black PLA Bambu Labs White PLA Basic HP3D Red PLA+ HP3D Yellow PLA+ 3D printing settings

Swap Instructions:

Print with 100% infill, base layer height 0.16mm, layer height 0.8mm.

Start with Charcoal Black At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest.