CandyGat PZ11 - PEZ Shooter

99 downloads · 3 years ago · UPDATED 9/29/2024 - Slide is less likely to break during assembly - Slide and Barrel clearance impro

This model is restricted by licensing terms.

View license.

Description

UPDATED 9/29/2024

Slide is less likely to break during assembly
Slide and Barrel clearance improved
Frame updated to fit grips better
Frame updated to fit mag release spring better
Sender improvements

The Candy Gat is back and better than ever! I promised a less-brick version and I think I delivered. Introducing the PZ11

THIS IS A CANDY SHOOTER AND NOT A WEAPON. IT IS MOSTLY HARMLESS BUT PLEASE DONT SHOOT IT IN YOUR MOUTH OR EYE.

DO NOT PRINT IN BLACK, GRAY, OR ANYOTHER COLOR WHICH MAY CAUSE THIS TO APPEAR TO BE A REAL FIREARM. DO NOT USE IN PUBLIC. ADULT USE ONLY. DO NOT GIVE TO CHILDREN. DO NOT DISPLAY IN PUBLIC.

This is a toy but intended to be used responsibly by adults.

ADDITIONAL PARTS This updated design does not need any screws or a pez dispenser but it does need some springs.

Compression Springs: (1) Sender: .38 OD x 1.18 L x .04 wire (1) Slide Return: .34 OD x 1.63 L x .03 wire (2) trigger / hammer: .17 OD x .63 L x .02 wire

Extension Springs: (1) Mag Pusher: .30 OD x 1.53 L x .03 wire

Spring Rod: (1) Mag Release: .05 Dia x 1.50 length

This kit has the 5 compression and extension springs you need (enough to build 2): https://www.homedepot.com/p/Everbilt-Spring-Assortment-Kit-84-Pack-13554/203133714

This is what I used to create the mag release spring rod: https://www.homedepot.com/p/OOK-9-ft-50-lbs-Smooth-High-Carbon-Steel-Piano-Wire-534279/301955147

3D PRINTING SETTINGS I printed on a Bambu P1P on the .20mm Strength setting with very little issues Supports are required. I used tree supports.

ASSEMBLY INSTRUCTIONS Depending on your printer settings, you may need to spend some extra time ensuring the parts are deburred and free of any defects.

Here is a video of me assembling one and talking through it a bit: https://www.tiktok.com/@soloprototype/video/7284233247452695850

Magazine assembly: https://www.tiktok.com/@soloprototype/video/7283143503750827310

Please contact me with any issues. I'm happy to help you get it working properly. If necessary, I'll make changes to the 3D model in a timely fashion and update them on this page

Private use only please. See license for more details. If interested in selling prints of this, please contact me or join the Commercial Partner plan

Tags:

Discussions

TrashyPanda2 years ago

One more question with this, did you print all the pieces in the orientation their stl’s are saved in?

soloprototype2 years ago

Yes - The orientation should be correct in the stl / 3mf files

TrashyPanda2 years ago

Is there any chance you’d do a remix of this on commission if I sent you the the files for the different cosmetic look?

soloprototype2 years ago

Do you mean so it looks like a totally different gun?

TrashyPanda2 years ago

It’s got a fairly similar shape to the PZ11 for the way the magazine would line up with the barrel.

https://than.gs/m/1024567

If you can take a look at that model and see if it’s feasible to keep the same firing mechanism and adapt that as a cosmetic remix. I’ve already purchased that model also and could send you the files if you think it’s not too complicated.

soloprototype2 years ago

Hm. Unfortunately that is going to be a lot of work and I'm not sure I have the time for that right now. 🫤

TrashyPanda2 years ago

Ok, no problem. Thank you for being upfront about it. I’m waiting on upgrading my pc currently but, after that I’ll take a shot at it. My current PC doesn’t have the capability to handle all the triangles in autodesk fusion. If you happen to find anytime to work on it just let me know and we can discuss what you’d need for commission on it. Thanks!

mastersonice2 years ago

How far does it shoot?

soloprototype2 years ago

Not super far to be honest. Maybe 20 feet? When I tried to make it shoot harder it would break the candy