The Candy Gat is back and better than ever! I promised a less-brick version and I think I delivered. Introducing the PZ11
THIS IS A CANDY SHOOTER AND NOT A WEAPON. IT IS MOSTLY HARMLESS BUT PLEASE DONT SHOOT IT IN YOUR MOUTH OR EYE.
DO NOT PRINT IN BLACK, GRAY, OR ANYOTHER COLOR WHICH MAY CAUSE THIS TO APPEAR TO BE A REAL FIREARM. DO NOT USE IN PUBLIC. ADULT USE ONLY. DO NOT GIVE TO CHILDREN. DO NOT DISPLAY IN PUBLIC.
This is a toy but intended to be used responsibly by adults.
ADDITIONAL PARTS This updated design does not need any screws or a pez dispenser but it does need some springs.
Compression Springs: (1) Sender: .38 OD x 1.18 L x .04 wire (1) Slide Return: .34 OD x 1.63 L x .03 wire (2) trigger / hammer: .17 OD x .63 L x .02 wire
Extension Springs: (1) Mag Pusher: .30 OD x 1.53 L x .03 wire
Spring Rod: (1) Mag Release: .05 Dia x 1.50 length
This kit has the 5 compression and extension springs you need (enough to build 2): https://www.homedepot.com/p/Everbilt-Spring-Assortment-Kit-84-Pack-13554/203133714
This is what I used to create the mag release spring rod: https://www.homedepot.com/p/OOK-9-ft-50-lbs-Smooth-High-Carbon-Steel-Piano-Wire-534279/301955147
3D PRINTING SETTINGS I printed on a Bambu P1P on the .20mm Strength setting with very little issues Supports are required. I used tree supports.
ASSEMBLY INSTRUCTIONS Depending on your printer settings, you may need to spend some extra time ensuring the parts are deburred and free of any defects.
Here is a video of me assembling one and talking through it a bit: https://www.tiktok.com/@soloprototype/video/7284233247452695850
Magazine assembly: https://www.tiktok.com/@soloprototype/video/7283143503750827310
Please contact me with any issues. I'm happy to help you get it working properly. If necessary, I'll make changes to the 3D model in a timely fashion and update them on this page
Private use only please. See license for more details. If interested in selling prints of this, please contact me or join the Commercial Partner plan