Craft sneaky strategies with these tricky tiles! They trap the first ball to enter each path, allowing you to outmaneuver foes in Hextraction, the hackable, 3D-printable board game.

The Triple Trap Tile can trap up to two balls, one each in different directions. Be careful entering too fast... it can be a bit touchy.

The Double Trap Tile only captures a single ball, but can be installed in four different orientations. It will occasionally trap too many balls, which are easy to knock loose!

Double Trap source: https://a360.co/3H2dJBS Triple Trap source: https://a360.co/3MoaVC5

All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed.

Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need 10mm steel balls or 3/8" slingshot ammo and a game board. To learn the rules and how to get started, watch the Hextraction video!

Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.

For more information, visit https://playhextraction.com.