Dmitry Kalashnikov16 followers

Foldable filament spool holder for Bambu Lab P1P with spring hinge . #ThangsBambuContest 3d model

Foldable filament spool holder for Bambu Lab P1P with spring hinge . #ThangsBambuContest

189 downloads · 3 years ago · This is a must-have for every printer owner Bambu LAB P1P and other Bambu LAB models. Foldable filam

Description

This is a must-have for every printer owner Bambu LAB P1P and other Bambu LAB models. Foldable filament spool holder with spring hinge consisting of three parts .Download, you will not regret it !!! #ThangsBambuContest

Discussions

pbjwm1 year ago

Is it possible to get the STEP files for this? 🙏

stiltskein3 years ago

Attractive design! However, I don't recommend using this with smaller 250g spools (even though they fit onto the holder arm—unlike the default Bambu spool arm).

The extra 1-3/4 inches distance this moves any spool from the back wall of the P1S caused my filament to cross diagonally over the top of my smaller spools, frequently binding up my extraction.

Granted, this was probably not designed for the 250g spools and these small spools (and I) can be accident prone already.

stevegong3 years ago

I've made a mod to the part so it can be used with the X1C. Check my page.

kurticus3 years ago

Yes this design is great but it doesn't work with the X1C. The AMS cable plug is right below where this would mount. If only the screw mount holes were at the bottom of the bracket it would work instead of at the top. Can you please publish the step file for the models, or have a variation with the holes at the bottom of the bracket instead of the top?

stevegong3 years ago

Excellent design but does not work with X1C with AMS! There's an AMS port under the screws, and this print will collide with it!