Raspberry Pi 3B+ case (screwless)
440 downloads · 5 years ago · This case is designed for a Raspberry Pi 3B+.
It has preparations for holding a 40x40x10 Noctua fan.
This case is designed for a Raspberry Pi 3B+. It has preparations for holding a 40x40x10 Noctua fan.
The case can be printed in PLA / PLA+ / PETG / ABA etc.
It was printed with the following settings:
- Layer height: 0.20mm
- Infill: 20%
- Support: nN
- Printing plate adhesion type: Brim / Skirt
If you like what you see, please leave a Like <3!
Raspberry Pi 3B+ case (screwless)
440 downloads · 5 years ago in  andÂ
Customizable Raspberry Pi 3B+ case (screwless)
Pi TFT50 TV - Vintage Tube TV Raspberry Pi case!
Boltless Raspberry Pi 3B+ case (3, 2 & B+ also fit) - More Cooling, Less Material Used, Printer Mounting Rail
Raspberry Pi 2B,3B case with GPIO slots
Raspberry Pi 3 B+ Case for Pi & Buck Converter LM2596 - For 2040 Extrusion and Prusa i3 Bear Upgrade
Pi Pie Raspberry Pi Case (Easy Print Version)
Pi Pie Raspberry Pi Case
Raspberry pi case 1
raspberry pi case 2
Raspberry Pi 3b+ Slide Mount Case
Honeycomb Raspberry Pi Zero 2 W Case Screwless
40mm Fan Top case for "Raspberry Pi 3B+ Case" by mkellsy
Raspberry Pi 3B Articulating Case
Raspberry Pi 5 case - Retro tower desktop
M!N!MAL 0 CH - Raspberry Pi Zero 2 / Banana Pi M2 Case / Housing / Sleeve with Heatsink & Cooling
RASPBERRY PI 5 CUSTOM CASE
M!N!MAL 5 CH - Raspberry Pi 5 Case
TerraPi SSD Case / Stand for Raspberry Pi (all models)
.png&w=3840&q=75)
Stay Put Case (For Raspberry Pi 4).stl
Its too small, cant get the board to fit in the case due to the charging port stiking out past the board and no enough room to fit it in. Also cant use a fan when most fan plug wires stand to tall to fit, and cant use a heat sink with a fan due to being too small.