A shorter variant of my Nintendo Switch dock dust cover, sized for when the Dbrand dock adapter is installed. Standard-height covers don't seat properly once the adapter raises the dock connector — this is the version that fits.

Drops into the dock's USB-C port and protects the connector from dust, lint and debris when the console is undocked.

What's in the pack

1 × STL file (single part, small print) 1 × 3MF with my Bambu Lab profile baked in (PLA, 0.2 mm, no supports)

Print notes

No supports — designed to print straight off the bed Print orientation: open face flat on the bed (default in the 3MF) 15% infill is plenty — not a load-bearing part Any colour PLA works; looks tidy in matte black or white to match the dock

Compatibility

Nintendo Switch dock fitted with the Dbrand adapter Designed specifically for the shorter clearance the adapter creates For a standard dock without the adapter, use my full-height variant — available printed on Etsy

License

CC BY-NC-ND 4.0 — personal-use printing only, no commercial reselling of prints, no STL redistribution or modification. Credit MuchaLabs in any posts.

Tiny print, fits any FDM printer.

🧡 Designed and printed by MuchaLabs 📩 Have a custom request? Just drop a message!

Don't have a 3D printer? Order printed and shipped from Etsy: muchalabs.etsy.com