Porch Goose, 54cm/21"

As requested a plain goose. Prints in Parts, fits a 256x256x256 build plate at 100%. Scale up or down. Ive just made the one size of this models as there is not many parts. If scaling down significantly, so anything lower than around 70% you made need to scan the connectors and 1-2% depending on how much you scale. If you've printed any of my previous models to give you a rough idea, at 100% its roughly XL size. To get a Not So XL size, scale to around 75%. There is no base with this one it is just a plain goose. Ive kept the wings in more of an arm like shape so that should you want to dress it yourself they can go in sleeves.. As usual the final build does require glue. The build is simple as there is only 10 parts, plus 14 connectors that are all the same size. insert two connectors into each leg. slide on the lower body, then insert 4 more connectors place on the upper body. 2 more connectors insert in the upper body, you can now attach the head. 1 connector into the beak and then push the beak into the front of the head. the 2 eyes don't have connectors and these just slot in place. lastly its 2 connectors in each wing which attaches to the upper body.

If glued tight the seems are heard to see.

filaments used, Bambu basic. white, orange and black.

0.2 layer, 5% infill on the large parts and 15% on the connectors