🖨 Print Details The Carrot Home prints in multiple parts for easy coloring.

The 3MF file is set up for Print-by-Object, allowing you to print the carrot, stem, and window together on one plate — just choose your colors and hit print!

The ground plate prints separately, which keeps everything clean and simple.

The default 100% scale of the carrot scene matches the 100% bunny, so if you scale them down, just make sure to scale everything proportionally.

I’ve print tested this down to 50–60% scale, and it still prints great at that size.

Supports are already enabled in the 3MF for the carrot hut and window, so make sure to leave those on. They should come off easily after printing.

🐰 Bunny Variants Included You’ll get two versions of the bunny:

• Plain version • Patchy version

**Downloaded file is not available for commercial use and is protected by copyright law. If you wish to sell my models commercially you must maintain a commercial license through our Thangs Subscription.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

📦 Files Included in the download:

2 Bunny Model versions:

100% and 60% Version (with accent on tail) 3mf 100% and 60% Version (no accent on tail) 3mf

You might choose to scale it down to 60% to save on filament (print tested to 60%). STL files are included (even single color looks great!)

Carrot Hut (includes Carrot, Leaves, Window and Ground)

🖨️ Print Settings:

• Layer Height: 0.2mm • 3 walls • 15% Gyroid or Honeycomb infill • Models are part-separated for easy multi-color printing • Use the left-side color assignment tool for best result (Remember to check flushing volumes)