Welcome to the sculpted edition of our Display Collection at Holoprops, now available in Blu-ray format.

Where the Classic Blu-ray Frame focuses on clean simplicity, the Runestone Frame - Blu-ray is all about art, texture, and visual impact.

This premium frame turns your physical games and movies into fantasy-inspired display pieces, as if they were ancient artifacts mounted on your wall.

If you want your favorite game or movie to look like a legendary relic, this is it.

Compatible Blu-ray Formats

• This Runestone Frame is compatible with:
• PlayStation 5 game cases
• PlayStation 4 game cases
• PlayStation 3 game cases
• Xbox Series X game cases
• Xbox One game cases
• Standard Blu-ray movies
• Standard Blu-ray steelbooks

If it follows the standard Blu-ray case format, it fits.

One Fully Hand-Sculpted Variant Sculpted entirely from scratch and no procedural textures Deep cracks, worn edges, and natural stone flow Designed for maximum depth, shadows, and realism

This is a 100% original Holoprops creation, sculpted by hand.

You can print it in:

• Single color 3MF included.
• Or Dual Color 3MF included. (We recommend to use a multi nozzle 3D printer).

Magnetic Wall System - Fully Compatible With the Display Collection

The Runestone Frame - Blu-ray uses the exact same Wall Mount system as: Switch Classic Frames Switch Runestone Frames Blu-ray Classic Frames

That means:

✅ One Wall Mount works across the entire Display Collection ✅ Switch and Blu-ray frames can live on the same wall ✅ No need to reprint or change your mounting system

Wall installation:

Uses 2 screws Drywall requires anchors Wood studs can use wood screws A drilling template is included so everything stays perfectly aligned and leveled.

Inside the Wall Mount, you will glue: 2 round magnets: 10 mm x 3 mm

⚠️ Very Important - Polarity Rules This system only works if polarity is respected.

• Both magnets inside the Wall Mount must be glued with the same polarity
• Every Wall Mount must follow the same direction
• The two rear magnets of the frame must always match that polarity

The same rule applies to:

• Switch Frames
• Blu-ray Frames
• Badge system
• All future Display Collection accessories

This simple rule is what allows you to swap frames instantly, anywhere, anytime.

Magnets Inside the Frame + Badge System

Each Runestone Frame - Blu-ray includes:

• 2 rear magnets for wall mounting
• 1 extra corner magnet for upcoming badges and decorative accessories All magnets across the entire Display Collection use the same size: 10 mm x 3 mm We strongly recommend buying a large pack of magnets so you are fully set for future releases.

Magnets are glued with: A small drop of super glue Press firmly into place Let fully cure before mounting On our side, we use a super glue accelerator so the bond sets in seconds. ⚠️ Again, polarity matters. Incorrect polarity will prevent frames and badges from attaching correctly.

Easy Removal From the Wall Despite its heavy sculpted look, removal is effortless: The frame naturally detaches from the magnets without force.

Optimized Printing and Premium Sculpted Finish The Runestone Frame - Blu-ray is printed at a 35-degree angle to preserve sculpted detail and minimize visible layer lines. The included 3MF file is fully pre-configured with: Optimized supports Strategic orientation Clean surface preservation Easy support removal Strong but material-efficient settings

These files have been tested extensively to ensure reliability, surface quality, and structural strength.

We spent days inside Bambu Studio documentation and dozens of real-world prints to dial this in perfectly. Please use the provided 3MF file. Each frame prints in about 3 to 4 hours, depending on filament and speed. For best results, we recommend: A clean build plate, washed with warm water and mild dish soap, air-dried A fully functional printer with a not-too-old plate or nozzle Using the provided 3MF file exactly as-is This ensures perfect adhesion and the cleanest sculpted finish possible.

Perfect Fit for Games, Movies, and Steelbooks The internal geometry is carefully engineered so that: All supported Blu-ray cases slide in easily No pressure on artwork No scratches or damage

Despite the sculpted mass, the frame remains perfectly balanced and secure on the wall.

Printing Details Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: Hatch (8%) or Cubic (15%) Supports: Yes. Perfectly calibrated in the 3MF file Walls: 2

Compatible with an A1 Mini

3MF Files Ready to Print Out-of-the-Box We fine-tuned countless slicer settings: infill, speed, bridges, seams, and more. Hours of research go into every file to give our Patreon supporters a true plug-and-play experience. The included 3MF files are optimized for Bambu Studio and should work correctly with Orca Slicer and Prusa Slicer. Using other slicers may break alignment, colors, or custom settings.

Join the conversation We’d love to see your prints! Share them on our Holoprops Discord and connect with the community.

Licensing All Holoprops models are 100% original creations, hand-sculpted with care and creativity. These models are our own intellectual property and are protected accordingly.

Personal use only. For commercial rights, join our Merchant Tier:

Thangs Merchant Tier

Filaments used eSun Bone White PLA.