The Cactus Vase is a modern, minimalist decorative object designed to be both beautiful and extremely easy to print. This model is 100% support-free, beginner friendly, and does not require AMS, dual nozzle, or multi-material hardware. A simple manual color change at a specific layer is all it takes to achieve a clean, elegant two-color result, with one color for the base and another for the cactus. Its 3D sculpted geometry and contemporary look make it a natural fit for desks, shelves, nightstands, or living spaces.

✨ Design & Features Easy two-color printing

• No AMS required
• No dual nozzle required
• Just pause the print and swap filament at one layer
• The included 3mf is already setup with the color swap, no worries.

Solid and durable design This is not a fragile decorative vase. The cactus has a thick wall design with three walls once printed, making it very solid and resistant to everyday handling. It is meant to be a long-lasting decorative object, not a delicate showpiece.

Functional base with pocket tray The base includes a small integrated pocket, perfect for everyday carry items such as keys, AirPods, or small accessories.

Main cactus The large cactus can hold dried flowers or decorative stems. We do not recommend using water, as watertight results depend heavily on individual printer settings and materials.

Secondary cactus The smaller side cactus is ideal for frequently used items like a pen or stylus, keeping them within easy reach.

A New Series Begins The Cactus Series Vase is the first model of a brand new series. Two additional designs are already in the works and will be released soon to complete this collection.

🎨 Printing Details: Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: Hatch (8%) Supports: OFF (not needed!) Walls: 2 Minimum Build Volume: 24cm x 11cm x 23cm

3MF files Ready to print out-of-the-box We’ve fine-tuned countless custom settings ➡️ infill, speed, bridges, seams, and more. Hours of research in slicer wikis go into every file to give our Patreon supporters the best plug-and-play experience. The included 3MF files are optimized for Bambu Studio and should work correctly with Orca Slicer and Prusa Slicer. Using them in other slicers may break alignment, colors, and custom settings.

Join the conversation We’d love to see your prints! Share them on our Holoprops Discord and connect with the community: 👉 https://discord.gg/HT47N9r7Y6

Licensing All Holoprops models are 100% original creations, hand-sculpted with care and creativity. These models are our own intellectual property and are protected accordingly. Personal use only. For commercial rights, join our Merchant Tier:

👉 https://thangs.com/designer/Holoprops/memberships

Filaments used eSun Bone White PLA and Polymaker Polylite Green PLA from the Polymaker Store:

👉 https://us.polymaker.com/?aff=1240&utm_source=affiliately&utm_campaign=aff

(This is an affiliate link, and if you decide to grab a roll, we get a tiny thank-you in return. We really appreciate your support!)