- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

HOTEND BOX (BAMBULAB A1 SERIES)

Today we want to present you our GRIDFINITY PRINT IN PLACE HOTEND BOX & SOCK BOX. The box is ideal for storing the A1 Series Hotends plus the associated accessories. The box also uses the gridfinity system mentioned above (which can also be fitted with magnets).

The inlets slide smoothly into the box and can be easily removed from the box through small cut-outs on the sides. The inlets can also be used as STANDALONE on your GRIDFINITY SYSTEM.

There are 2 different versions of the inlet:

• V1 → 4 Hotends, 4 Screws, 2 Socks
• V2 → 6 Hotends

The print in place box is very sturdy.

CAN BE PRINTED IN MULTICOLOUR OR SINGLE COLOR. THE INSERTS HAVE A RAISED LOGO SO THAT THE LOGO CAN ALSO BE PRINTED WITHOUT AMS.

WE ALSO UPLOADED A .3MF-FILE WITH ALL SETTINGS

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte black, white, red (used in our make)
• Infill: 10% Gyroid or Grid
• Layer Height: 0.2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: needed
• Brim: None needed, but when you have adhesion problems than activate the brim

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios