The MARINE vase has a curved shape and a subtly spiraled design. The irregular grooves give the vase an elegant appearance with a touch of playfulness.The vase can be 3D printed as a normal vase or in vase mode.

Place this vase on your side table or sideboard where the ribs catch the light and create subtle shadows. The narrow opening is ideal for a few eucalyptus branches.

Dimensions: D10 x H20 cm Resizable: yes, in your slicer 3D Model Type: shelled body and solid body (vase mode) Printing technique: FDM / FFF File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings Normal mode Nozzle diameter: 0.4mm, 0.6mm, or larger Bottom and top layers: 4 Infill: 5% Perimeters: 2 Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: defaultWatertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

Vase mode Nozzle diameter: 0.8mm or larger Bottom and top layers: 4 Infill: 0 Perimeters: 1 (vase mode enabled) Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: default

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license.

Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon or Thangs Membership.

Thank you for respecting the time and effort that goes into each creation.