The KIRA vase has a geometric form with sharp angles and a fine ribbed pattern. The pattern creates beautiful light reflections that emphasize the form. This vase stands out with its calm, modern appearance.

Place this vase on your side table or sideboard where the design catches the eye. The narrow opening works beautifully with a few stems of oats or dried flowers. Even without filling, the KIRA vase is an elegant accent in your space.

Dimensions: D8.2 x H20 cm Resizable: yes, in your slicer 3D Model Type: shelled body Printing technique: FDM / FFF / SLA File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings Nozzle diameter: 0.4mm, 0.6mm, or larger Bottom and top layers: 4 Infill: 5% Perimeters: 2 Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: default Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon or Thangs Membership.

Thank you for respecting the time and effort that goes into each creation.