Connectors and Fittings for AUS PVC Pressure Pipe Fittings (for Non-Pressure Use)
CUSTOM 3D PRINTABLE PVC FITTINGS – AUSTRALIAN PN18 SIZING
These fittings are designed to suit Australian PN18-labeled pressure pipe in 32mm, 25mm, and 20mm sizes, as sold at Bunnings.
IMPORTANT: THESE ARE NOT FOR PRESSURE SYSTEMS They follow PN18 sizing for compatibility, but do not meet any pressure certification standards. Use** only** in **non-pressure **applications like:
- Green screen rigs
- PVC framing
- DIY stands
- Garden structures
Pipe sizing in Australia (Yes, it's weird) Pipe sizes are based on internal diameter (ID), but fittings must match the outside diameter (OD) of the pipe.
- 32mm pipe = 34.0 mm OD
- 25mm pipe = 27.0 mm OD
- 20mm pipe = 22.0 mm OD
INSERTION DEPTH These parts are designed to fit those outer diameters with a 25 mm insertion depth for each connection. **Exception: **The AUS 20mm PVC PN180 Straight Coupler has no internal stoppers, allowing full pipe pass-through.
PRINT SETTINGS USED
- Material: eSun PLA Plus
- Nozzle Temp: 215 C
- Bed Temp: 60 C
- Layer Height: 0.3 mm (first layer 0.2 mm)
- Infill: 25 percent
Also included is a 6 mm drill guide for drilling bolt holes instead of using glue. Pre-holed versions may be uploaded later if there is interest.
NOT FOR USE WITH PRESSURISED LIQUID OR GAS. STRUCTURAL USE ONLY.


















