A modular portable organizer with 3 magnetically secured drawers.

Customization

Bin Options

• Plain
• Segmented Square
• Segmented Long
• Deep

Core Options

• Default
• Bolt - uses an M3 socket head bolt and M3 nut instead of glue

Required Hardware

Requires 12 strong 6x3mm cylinder magnets

Printing

• No supports required.
• Use filament with good mechanical properties. Silk and matte filaments might be too brittle.

Assembly

• Glue magnets into bins. Exact orientation does not matter as long as you are consistent between bins.
• Glue magnets into the core. Orient so the bins are pulled toward the core.
• Glue both halves of the core together.
• Insert bins.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text "Portable Three-bin Dresser" (https://3dprinty.xyz/project/146) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/)