BLISS | Table Lamp E14, E26, E27

I wanted to make a shade entirely closed-up, joining at the sides and at the top, a bit like a pillow-shape. And I really like the way it turned out.

I also added a little screw-in container to add some weight to the base. You can fill it up with clay, some gravel or some sand. It makes the lamp very stable, gives it a more premium feel.

This lamps works with either E14, E26 or E27 sockets.

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK
 E14 cord:  https://amzn.to/3TchBqs

For the US: E26/E27 cord:  https://amzn.to/3U0Xyvy

Happy printing!

DIMENSIONS (shade) | L180 mm x W90 mm x H 200 mm

DIMENSIONS (base) | Ø100 mm x H 103 mm

3D PRINT SETTINGS: The shade and the base print upright. (STL files already oriented properly).

SHADE: The shade 3D model is full, that's normal. To make it empty/hollow, you have to set the infill to 0%.

Wall line count: 2 Bottom layers: 5 Resolution / Layer Height: 0.2mm/layer or less Seam position: Back Infill: None (0%) Build adhesion type: None Supports: None

In Bambu Studio:

• make sure to untick "ensure vertical shell thickness" in Speed settings or you'll end up with extra thickness here and there.
• set "Wall Generator" to "Arachne" mode in Quality settings, or you'll end up doubling the print time.

BASE: The base prints with regular settings, no particular trick. No brim or supports needed.