Description

A small imperial selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library.

They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. Brim should be used if you have bed adhesion issues.

5/16" Flanged Washer

5/16" Crimp-on Retaining Ring

5/16" Heavy Profile Hex Nut - 24 TPI

5/16" Knurled Head Thumb Nut - 24 TPI

5/16" Serrated Flange Hex Head Bolt - 24 TPI

5/16" Flat Head Torx Bolt - 24 TPI

½" Flat Head Phillips Bolt - 13 TPI

½" Wedge Lock Washer - Print x2 to use as locking washer

½" Screw Mount T-Nut - 13 TPI

1/2" Wing Nut - 13 TPI

7/8" Washer

7/8" Hex Head Bolt - 9 TPI

7/8" Distorted Head Flange Nut - 9 TPI