Designed a simple tile holder for Void Star Lab's game Hextraction https://www.playhextraction.com/. I recommend printing with the long side down as this requires no supports. The top can slide both ways to reveal either side if you don't like what you see, and I have also found this design works well when stood up and the cover partially removed so that you can pull tiles from the bottom. This has a total length of about 250 mm, so basically as big as I could fit on my A1. About 10-15 tiles fit in each tube depending on if they have additional thickness or are a dual tile like the teleport or 2-in-1 tile.