I'm excited to introducing my Warthog design!

They have such interesting and strange faces, haha. It was a lot of fun to sculpt. The head and tail snap-fit to the body.

Check out a quick Demo Video Here!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!

Please, share photos of your makes! I would love to see them!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Visit my Amazon Storefront for links to the Filaments & Equipment I used. . . Printing Details:

• Body: Print-in-Place. No supports needed. There is a small pre-support under the head ball joint. Remove and discard it after printing
• Head: No supports needed. There is a small custom brim around the head to help with adhesion. Remove and discard it after printing
• Tail: Snap-Fit to Body. No supports needed.
• Multicolor 3MF (Compatible with PrusaSlicer and Bambu Studio)
• 10%-15% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

This should generally scale down to about 60%-65% with full articulation, on a well calibrated printer. Your mileage may vary.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.