Introducing my Wolf design!

This features a print-in-place body with snap-fit heads in two variants!! You get the standard smiling face and the howling face versions! The snap-fit makes it pretty easy to swap between the heads.

Check out a quick Demo Video Here! (I added small leg pre-supports after recording this, just for a little added security)

Multicolor 3MFs included (Compatible with slicers based on PrusaSlicer, Bambu Studio, Orca.)!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Visit my Amazon Storefront for links to the Filaments & Equipment I used. . . PRINTING DETAILS

• Two Heads: both Smiling Face and Howling Face versions! Snap-Fit to Body. Swap between them. No supports needed.
• Body: Print-In-Place, Pre-supported. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them.
• Multicolor 3MF! (Compatible with slicers based on PrusaSlicer, Bambu Studio, Orca.)
• 10%-15% Infill.
• 3 Walls

This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.